Belkin Recent Questions, Troubleshooting Help & Support

Make sure that you successfully paired dingle with mouse.

http://www.belkin.com/uk/support-article?articleNum=4998

That's been a problem for years. Sleep mode turns off USB devices, and they seldom wake when the computer is activated again. To make sure this isn't the problem, you can

• Go into Device Manager and under each USB Device, Power tab, disable "Let this device turn off to save power".
• Edit Sleep Mode to not control USB devices.
• Don't use Sleep Mode.
• Unplug the adapter, wait a few seconds, plug in the adapter.

If none of these help, try a self-powered hub. The internal power supply lets you use about 500ma for each USB device, but some draw more current than that. The self-powered hub can deliver what's actually needed for the devices.

sounds like you have to reset the router and put in your info again as when it was new ...

1. Take a Ethernet cable and connect your modem from internet port of the belkin router and power on your modem.
2. Take another Ethernet cable and connect your computer from Anyone empty Ethernet port of the belkin router. (if you have laptop then you may connect your laptop using wireless facility. You will find the username and password in the back of your router) .
3. Now you need to power on your modem and wait for all lights to turn into green or blue lights. If all you have yellow light on your router. Then you need to restart your modem and wait for 2 minute. For more information you can visit : Belkin Router has solid orange light
4. If you have solid green light on your belkin router, you need to go to your computer and open your browser.
5. At the very top address bar you need to type the ip address 192.168.2.1 for opening the router setup page. (Sometimes the ip address may be different, you can check the router's ip address via running the ipconfig)
6. Now you will be able to see belkin router setup page, so you need to click on detect my connection.
7. If your computer will able to detect the connection properly then this will forward you to the wireless setup page. Here this will ask you to change the password (If you want) and click on next.
8. Finally you will able to see all configurations window, so you need to check all configuration and click on save and continue to save all settings on your router. Now you belkin router will reboot and this will show you router admin page.

Finally your belkin router will setup and you will able to use the internet. you may try to connect the devices, whatever you want to connect with it.

http://www.belkin.com/us/support-article?articleNum=7986 If they are charging that much for support I would return it anyway. Get a Netgear router

Disconnections are generally relative to the Internet Provider and Speed. If the speed drops, the router can disconnect and reboots. Just make certain you always update all drivers and especially if you are in Windows, keep up with current updates. Check your device drivers and do update from there also.

try a different mouse if it works then your Belkin mini mouse is defected.

you need password or numbers off your router for it to connect

There is an update available: http://www.belkin.com/us/support-article?articleNum=4803

install it on a PC on the network possibly and then it can handle the storage management while the PS3 can see it as an external drive.

Well fer a start you should'nt be sitting round al day playing games. Maybe gitcher but off the sofa and mow the lawn like you said you were gunna do last week.

I just connected my Ethernet cable and had my pc join the built in network. I personally don't like those extenders

maybe theres a cut wire inside the cord

What kind of software support you want. Router has own interface ans user menual show everything. If you want any kind of interface support let me know i help you

uninstall the driver and get a new driver from a wlan site ( browser search bar type in -- drivers for WLAN systems ) Win xp is no longer supported by Microsoft so expect many more problems in the future as the operating system continues to fail Time to uninstall win xp and install win 10

you probably want to access you router, right ? Your router has a standard passwort set yhich should be written under your router ( depends on which router u use ). If u changed it you can reset your router to factory settings and then reenter it and it should work. (you have to look up how to reset your router because i dont know what kind youre using ) Resettin will also reset wifi passwort / name and ever other options u might have changed beforehand.