Belkin Logo

Belkin Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 883 Products
  • 53K Answers
  • 1M Views
0helpful
3answers

I have lost my install

Belkin has a great support site and this link here will take you a page where you can download a new manual, firmware updates, and even troubleshooting help with setting up the router with Comcast, Bell South, and Cox cable systems.
Good luck to you.
8/11/2021 11:49:06 AM • Belkin... • Answered on Aug 11, 2021
0helpful
1answer

Drivermax

Routers are very important for setting up an internet connection. As we all know, the Internet is the most important network, which connects us to the world. There are various companies exist in the market, which offers routers. But Belkin is the top market-leading company for routers. Advance features, technology is the attributes of the Belkin router. For a new router user, installation is a big challenge, and in case the user doesn't.have installation CD then it becomes more difficult. So in this blog, we are going to discussHow to Setup Belkin Router Without CD. Now, you do not need to worry about the installation process, There are 2-3 ways to set up Belkin Router Without a CD.Now one question comes to your mind, How? So Tech Support Experts are here to answer all your queries. Our team is experts in technology and here we will elaborate on the steps to Setup Belkin Router Without CD.
8/11/2021 9:42:08 AM • Belkin Computers... • Answered on Aug 11, 2021
0helpful
1answer

How do I Reset my Belkin wifi Extender?

Using the reset button The location of your range extender's reset button will vary depending on its model. The reset begins once you press and hold thereset button for at least 10 seconds while the range extender is powered ON. The Status Light on the the range extender will momentarily flash and will then begin to blink. When the light becomes solid again, the reset is complete. Using the web-based setup page If using the physical button does not work, you can access the range extender's web-based setup page and do the reset from there. Before you begin:
  • Make sure that the wireless computer or device you're using to access the web-based setup page is connected to the same network as the range extender.
  • You need to identify the IP address that your router has assigned to your range extender. Locate this by accessing your router's DHCP Client table. Once you have the range extender's assigned IP address, use it to access your range extender's web-based setup page.
  • Alternatively, you can enter "http://192.168.206.1" in the web browser's Address bar if your range extender has NOT detected a DHCP server in your network.
Step 1: In the web-based setup page of the range extender, go to Utilities and select Restore Factory Defaults. QUICK TIP: You may be prompted to log in with your range extender's administrator password. If you have not set any, simply leave the field blank and click on Submit. Step 2: Click on the Restore Factory Defaults button. Your Belkin range extender should now be restored to its factory default settings.
7/6/2021 5:52:04 AM • Belkin Computers... • Answered on Jul 06, 2021
0helpful
2answers

Belkin Router not allowing an Internet connection

It's not unheard of for a router to fail. When you connected the computer to the Modem, did you use the same cable that was connected to the router? Does your internet connection require a username and password? If so, is that configured in your modem, or the router? If not in the modem it must be the router.
6/18/2021 6:45:05 AM • Belkin... • Answered on Jun 18, 2021
0helpful
1answer

Lost Belkin Wireless G Router F5D7230-4 installation disk?

Losing the Belkin setup cd or software disc is one the most common problem. The best part is that you can install belkin router without cd disc. This process is called belkin web setup. Follow the steps below:1.Open browser in your pc and type 192.168.1.1 an dhit enter.2.Insert username and password given on the bottom of the Belkin router then login.3.Go to Internet settings and choose your internet connection type.4.Enter internet information given by your internet service provider.5.Now go to Wireless and Settings.6.Type SSID name as your wifi name and passphrase as your password.7.Click on Save settings and restart your Bekin router.8.Connect with your new SSID and password.
6/18/2021 6:29:29 AM • Belkin... • Answered on Jun 18, 2021
0helpful
1answer

How to uninstall belkin security

Scroll down and select your Belkin device's setup utility. This varies by product, but begins with "Belkin" followed by your device type. Click "Uninstall" and enter your Windows administrator password if prompted. Click "OK" to confirm that you wish to uninstall.

How to Uninstall a Belkin Utility

6/10/2021 8:19:04 AM • Belkin Computers... • Answered on Jun 10, 2021
0helpful
3answers

The modem light wont stop flashing amber

Replace it , they dont last long and often chips go inside them,cheaper to have replaced than repaired.
6/9/2021 8:15:30 AM • Belkin Computers... • Answered on Jun 09, 2021
0helpful
2answers

What is 54g-LRS mode? BEWARE SPAM NUMBER +1-800-532-4187 BELOW

In some cases, older 802.11b clients may not be compatible with 54g wireless. These adapters tend to be of lesser design or use older drivers or technology. 54g-LRS (Limited Rate Support) allows these clients to be compatible with the newer 54g technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category of adapters, first check with the adapter vendor to see if there is a driver update. If there is no driver update available, switching to 54g-LRS mode may fix your problem. Please note that switching to 54g-LRS mode may decrease 54g performance. It is not recommended you use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 54g and 802.11b standards.
2/9/2021 1:18:57 PM • Belkin... • Answered on Feb 09, 2021
0helpful
4answers

Is there a Windows 7 driver for the Belkin F5U109 BEWARE SPAM NUMBER +1-800-532-4187 BELOW

Sure there is. This amazing tool driverupdate us will keep every single driver up to date like no other program (from personal experience). Take a look and enjoy
2/9/2021 1:18:38 PM • Belkin USB PDA... • Answered on Feb 09, 2021
0helpful
2answers

Router will not go wireless. all lights come on

The "wireless" (second) light on this model does not indicate that the router's wireless features are active, it indicates that a computer is connected to the router wirelessly. If the "router" (fourth) light shows three little "radio wave" symbols, the router's wireless capability is on.
12/28/2020 6:55:35 PM • Belkin... • Answered on Dec 28, 2020
0helpful
1answer

How do i setup belkin range extender without disc?

you need the software from Belkins website.
5/22/2020 7:09:41 AM • Belkin Computers... • Answered on May 22, 2020
0helpful
2answers

Setup with roadrunner

Connect Router - Desktop

Open RSP By typing 192.168.2.1

On the Left side under Internet WAN Click Connection
Type

Leave the password blank and click Submit

The Connection Type Should Be Dynamic

Click Next

There should not be any Host name & Click apply

On the left Side Click MAC Address Under Internet WAN

Click Clone And Click Apply Changes

It Should Work
5/12/2020 9:59:22 AM • Belkin N... • Answered on May 12, 2020
0helpful
1answer

After resetting my Belkin Wireless Pre-N router I click submit to login belkin router I get

Still not reset. Hold the reset till it cycles. A simple push only restarts it. You have to hold it in while power is on.
4/15/2020 5:42:25 PM • Belkin Wireless... • Answered on Apr 15, 2020
0helpful
1answer

How to fix Belkin Router DNS Error ?

Today Everyone wants a hight internet Speed but when suddenly the internet gets disconnected then this is very frustrating situations. DNS means domain name system Here the solution for ROuters Error: Firstly fix the login page issue. Go to the Internet WAN icon and click on the DNS icon. Go to the Internet WAN Setting where you can access the link. Uncheck the Checkbox near of Automatic from ISP. After the enter DNS address which you want set on Blink Routers.
2/7/2020 7:33:22 AM • Belkin Computers... • Answered on Feb 07, 2020
0helpful
1answer

Belkin wireless G+ usb adapter

AOL has been and will always have problem (had to do repairs on AOL computers since 1994)

If you have a DSL or Cable connection why pay again for AOL? That means you are paying twice for the same internet connection - and AOL causes lots of problems.

For AOL problems, it is best to contact AOL.
1/29/2020 7:22:16 PM • Belkin (F5D7050)... • Answered on Jan 29, 2020
0helpful
4answers

How do I set up a security password

Here's a video on how I did it on my F9K1003V1.
1/3/2020 6:20:48 AM • Belkin Basic... • Answered on Jan 03, 2020
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Belkin Experts

Ekse

Level 3 Expert

13435 Answers

Mike

Level 3 Expert

4377 Answers

 Mikey
Mikey

Level 3 Expert

6726 Answers

Are you a Belkin Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...