Baume Et Mercier Watches - Answered Questions & Fixed Issues
I cannot pull out the
It may be that the crown needs to be unscrewed before being able to pull it out.
Try turning the crown anticlockwise about 1/4 of a turn, then pull.
Don't know how to set
I presume that you are winding the watch 24 hours to change the date.
You can shorten the time it takes to change the dates in the following manner:-
Wind the watch until the date changes, then turn it back until it passes 12 again and then turn it forward. Each time it passes 12 the date should increase by a day.
You may have to experiment to find how far past 12 in both directions to get the date to change.
Can i change the battery in my baum & mercier
mcdevito75 here, On this make watch it may be best to bring it to a small watch repair shop in your area. Unless you have changed many watch batteries you could end up scratching the watch, damageing the crystal etc. anyway, the battery is good for a year so why take the chance on hurting the watch.
I have a Baume Mercier
Follow this link and find the nearest to you:
http://www.baume-et-mercier.com/retailers?type=2
There is no other way to find the pieces you want.
Rate me please.
I am needing to find
mcdevito75 here, Best bet, look for a small watch repair shop in your area for a new strap.
Does not keep time
mcdevito75 here, Yes and No, While any sharp, sudden, or very hard motion of your hand, wrist or arm can hurt a watch, it seldom does, most of the time you"d have to actually bang the watch against a hard surface, Wall, Floor etc to effct the movement, and usually you just scratch the crystal or caseing. .
After winding, watch begins to loose time almost
A number of possible reasons. If it is old then needs a good cleaning and proper lubrication. If it ever got moisture inside then water could have cause some damage. If very old then mainspring could be getting tired and needs to be replaced. Also possible damage to the hairspring from various reasons. Sounds an expensive watch so take it to a good repair shiop
Baume & mercier hampton city watch
Does the dial have "Automatic" wtitten on it". If it does then it's a mechanical movement. If it has "Quartz" then it requires a battery. If the watch isn't running perhaps it just needs a battery. This may also explain why the pushers aren't working. If it's mechanical the watch needs to be wound before the pushers will work. What are the markings on the subdial.
How to open Baume & Mercier Hampton Milleis ladies stainless band
Looking at your watch it looks like the clasp on the SS model is just a double deployant preasure fit. If it is brand new sometimes these style of deployants are vary tight.
It is Stainless Steel it is vary difficult to break it looking at the construction of the bracelet.
Basically you just Pull, there is no button it is just pressure fit.
mike -- consumerwatchguide.com
Reset
you are so screwed. go to '0'.com
Not finding what you are looking for?