Averatec Computers & Internet - Popular Questions, Answers, Tips & Manuals
Averatec 6200 motherbord specifications ? Compatible procesor upgrade with SSE 2 thanks
The Averatec 6200 laptop was released in 2004 and is powered by an AMD Athlon XP-M 2400+ processor with a clock speed of 1.8 GHz . The motherboard of the Averatec 6200 is based on the SiS741 chipset. The laptop comes with 512 MB of RAM and a 60 GB hard drive . The laptop's display is a 15.4 inch, 1280 x 800 (WXGA) screen.
As for the processor upgrade, the Averatec 6200 is compatible with processors that support SSE2 2. SSE2 is an extension of the IA-32 architecture, based on the x86 instruction set. Therefore, only x86 processors can include SSE2. The AMD64 architecture supports the IA-32 as a compatibility mode and includes the SSE2 in its specification. This means virtually every modern Intel and AMD CPU supports SSE.
11/6/2023 8:19:13 PM •
Averatec...
•
37 views • 0 helpful votes
Averatec 1000 webcam doesn't work
Integrated webcams are not useable with the Windows 7 OS. Windows XP had webcam software that enabled you to use the camera, as does Windows 8, 8.1 and 10. The patch to solve the issue with the integrated webcam using Windows 7 was never resolved... Not to my knowledge anyways. It would always come up with the message that the webcam was "Already in use by another program".
I cannot turn on my AV 2260 EY1. Nothing happens.
More than likely the power supply has gone bad. If you or a friend has a Volt meter you could test to see if electricity is getting from the wall to end of the cord (USE CAUTION TO NOT ZAP YOURSELF). In general the first thing to stop working on a laptop is the battery, and the second the power supply cord. That is my guess. How do you fix the power supply cord... buy a new one. I tried to fix one once, ended up all bad.
1/19/2018 8:54:02 AM •
Averatec...
•
81 views • 0 helpful votes
Averatec e1200 laptop i think it caught a virus
Hold the delete button when you turn it on and see if it loads BIOS up. If the screen displays the BIOS OK then you can change the boot sequence to CD/DVD or USB first and do a fresh windows installation. You could also try holding F8 at bootup and try loading safe mode. If this doesn't help it could be a problem with your screen or the wiring going to the screen. Possibly also a problem with the graphics card.
11/23/2017 6:48:04 AM •
Averatec...
•
141 views • 0 helpful votes
I'm trying to disassemble my
Has to be carefully pried like other laptops. Google the dissassemly of the unit and you will find out how to and also maybe even get a utube video.
9/1/2017 10:30:03 AM •
Averatec...
•
180 views • 0 helpful votes
Laptop will not boot when turned on
Go into bios and make sure that your cd player is set up as the first boot up device. Then insert the disk, reboot and follow the prompts to install the OS. When thru get the drivers you need and you are good to go!
Averatec 6200 series laptop will not turn on. It
You need to check that power is getting into the unit from your external power adapter.. It is not uncommon for the female power receptacle to disconnect from the board and have no power reach the computer.
If power is definitely getting into the unit, then the bios (computer's computer) has gone South. If so it is time to go shopping.
I have a Averatec D1002UHCE-1 All-In-One Intel
Google to see what are the mo bo specs for that unit and cpu upgrade. Quad core units have different sockets and will not fit into what you have. Check to see if you can go further that the 2.4GHZ intel core 2 duo - those chips pack a lot of bang for the buck.
And upgrading ram does not add speed to a computer. All is does is to help minimize the speed loss that occurs when you put the chip under load - similar to the rpm reduction of your car motor when you slip it in to drive from park. Capiche?
3/3/2017 12:54:03 AM •
Averatec...
•
216 views • 0 helpful votes
Not finding what you are looking for?