Wrong Regional Disc.
DVDs are ecoded with region codes to indicate what area of the world they are made for. These codes may be 1,2,3, etc depending on which region they are made for.
DVD player read these codes and if the disc region code does not match the region the device is made for, the player will not play the disc.
Region 1 is for USA so most DVDp players made for use in USA require region 1 discs.
Some DVD players called multi region DVD players can be set to play different region DVDs but they are typically more expr=ensive then one region players and the code must be changed each time a different region disc is played.
on Jul 30, 2020
FVD interface failure is flashing.
Is it flashing 2-3? Try this: You
can reset the control by unplugging the blower during start up, leave
unplugged for at least 5 seconds, plug back in and within 30 seconds
cycle temp control from hot to low 6 times.
on Jul 07, 2020
Need reset code for richmond
I am poting this here hopefully it will help someone else. I have a richmond 40 gallon power vent water heater and it was not working. It was flashing 2-3 on the LED. I used this procedure and it started up..
you can reset the control by unplugging the blower during start up, leave unplugged for at least 5 seconds, plug back in and within 30 seconds cycle temp control from hot to low 6 times.
on Nov 24, 2019
I am showing no disc on the dvd player but the
Are you trying to play a burned DVD or a purchased/rented DVD? If so, the movie files will be in a different format. (e.g. .avi or .mpg versus VOB files). Some dvd players will play burned dvds, the key is to look the acronym DIVX. This ensures that the dvd player will play .avi and .mpg files.
on Sep 20, 2019
Wrong Regional Disc
DVDs have region codes to prevent black-market selling of them and
whatnot. Where did you buy the DVD? Where did you buy your DVD player?
I don't think so.
What if you moved to another country? What if you decided to take your
player on your yacht and sit out in international waters watching DVDs?
Try deregioning the hardware. Get the make and model number and enter
it with "de-region" or "DVD region hack" into google. You may find
instructions for de-regioning the player. It usually consists of taking
any discs out, restarting the machine and then entering a number code
that allows you to set the region to "0". Most of the cheaper,
Chinese-made DVD players have a work-around like this. Post the model
and maybe I can find it for you.
on Aug 29, 2019
Poor radio reception with Jensen VM9512 in 2001 Nissan Altima
If you used the 2 plug nissan radio harness, there should be a blue wire on there which is the (power antenna) even if your car doesn't have a power antenna, this wire needs to be connect to power on the am/fm amplified ant which is used in many nissan cars.
if the jensen has a blue or a blue/white wire, connect it to one of those. if not, you can always connect it to the red ACC wire. that should solve your reception problem..
hope this helps
on Jun 20, 2019
Not finding what you are looking for?