AT&T Lands Phones - Page 9 - Recent Questions, Troubleshooting & Support

This problem can be caused by the following, A bad battery, (which you say you are all new). A full base memory and a Faulty main base unit
This main base unit can only expand to four handsets and no more. If the base unit has been reset then the assigned numbers for each handset would begin with " handset 1" if they show any other number when reset then it would not have been reset..To re-set main base you will have to
De-Register All Handsets
Unplug the power supply from the base unit then Remove all handsets from the charge cradles and base then Press and hold the PAGE button on the base.
Plug in the power supply again while pressing the PAGE button, Continue pressing PAGE until the IN USE and CHARGING indicators are lit. (this could take up to 10 seconds)
Release the PAGE button All Handsets will display "enter base id".
If this does not solve your problem then you will have to replace the main base

AT&T E5634B... | Answered on Apr 22, 2017

There are different kinds of rechargeable batteries. NiCad and LI ion. There are also carbon batteries that can be recharged.

AT&T E5965C... | Answered on Apr 15, 2017

we never did help you as we do not charge for advice on FIXYA . Go buy a new phone, best solution

AT&T Lands... | Answered on Apr 13, 2017

Not finding what you are looking for?
AT&T Logo

2,215 questions posted

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

6063 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

85222 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides