AT&T Lands Phones - Page 4 - Recent Questions, Troubleshooting & Support

Your AS60 was actually made by Lucent Technologies. To get the user manual for your AS60, click here: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjHwt3AkuDYAhUKy1MKHfD5DioQFggpMAA&url=http%3A%2F%2Fpdfstream.manualsonline.com%2F9%2F95d0b146-284d-4eb8-8183-3b2139000c9c.pdf&usg=AOvVaw2eqahlm2o8UHtNxCC2o0Rq Good luck.

I've pulled up the user manual for your phone. Thank you for providing the phone make and model first, and the complete description of your issue! The manual says the battery should be charged for 15 hours before first use. You may be set to pulse dialing , even though the factory default is for tone dialing. If you push the 7 key, you would hear 7 pulses or clicks in succession. The dial tone will be gone once a pulse has been received. And you say there are clicks heard and no dial tone. You can set Handset settings (Page 12 in the PDF copy) and customize how your phone works. Hit MENU and use the up-arrow and down-arrow keys to scroll to the desired feature., this time called DIAL TYPE, then his SELECT. Looks like the sixth menu entry from the top after LANGUAGE. It should read: DIAL TYPE TONE If it says something else, perhaps PULSE, use those arrow keys again to change the Dial Type to Tone. Then use OFF to back out of the selection and again to clear the menu. Attached is the link to the manual. Click the button on the screen to "Open as PDF" and you can open it in your PDF reader software or save it to your device for offline reading. http://phone.manualsonline.com/manuals/mfg/att/e2125.html

If you still have access to the old base you can de-register the handset by following a simple process. You will have to de-register all handsets registered to that base.

• Make sure that all handsets are out of the telephone

base and chargers before you begin deregistration.

• Press and hold /HANDSET LOCATOR on the telephone

base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button.

• Immediately press /HANDSET LOCATOR while the

IN USE light is still flashing. (The light flashes for about seven seconds. If the light stops flashing, start again with Step 1.)

• It takes up to 10 seconds to complete the deregistration process. Wait

Google at&t 2.4 ghz cordless phone manual and checkout the links.

Hey there Tgd258, Yes... indeed AT&T has been making answer machines (that I am aware of) ... For more than a half a century ... Western Electric, Lucent... whatever... they all share VERY clear... concise DIRECTIONS. Digital means it does not even need tapes... Read the instructions and you are good to go... AT 1782 User Manual Hope this helps Carnac the Magnificent