Asus wireless router
what kind of connection do you have? and to what?
I assume you have an ADSL(high speed) connection to the internet, and are trying to connect wireless to a laptop or something.
what kind of devices are you trying to connect together? this will help with an answer.
Tablet wont charge
Use a higher amp rated charger, (same voltage and polarity)..but I would suggest letting it complete it's charging cycle before trying to operate it..
The number 2 is showing up on your keyboard because you have the Num Lk (Number Lock) key on and you are probably hitting the FN key then the K key so the little number 2 that is on the K key appears as what is typed. for example: On my keyboard there is a Big Letter K key and also on that key is a small number 2 which is blue. In order for me to get the number 2 when I type I have to have the Num Lk key on and then I have to Press and Hold the blue FN function key on the lower left of my keyboard then hit the K key and the number 2 is what gets typed.
Phenom ii x4 965 m2n68-am plus
Yes it will because I have the se edition of it. However I cannot recommend this combination because if this is like the se version it only supports a max of 4 gigs of ram. Shockingly 4 gigs of ram is still enough to play almost all titles that I know of. With that said I think serious pc gamers want at least 8 gigs. I'd recommend 16 gigs now a days.
Hard drive is locked, enter user password
Download a "password recover program" that will either tell you your password or reset it so you can log in. These are free ware hacker tools so do your research, follow the directions, and most of all, proceed at your own risk.
Hello, My HDD led is not blinking on my PC but when I connected to my friends PC it worked. The green light is working perfectly when I connect it to the HDD led point it blinks but the red.
Look for the LED pins on your motherboard. One should be labeled HDD+ and one HDD- make sure the cables are plugged into these pins. Doesn't really which color wire to the + or - If it is plugged in the LED on your case could be bad. To test this will need a multimeter. Unplug the HDD cables from the pins. Set the multimeter to measure resistance the horseshoe 1 or 10 Ohms is fine. Stick a probe in each connector if the probes dont fit stick a paper clip in each hold and touch the probe to the paper clips. Dont let the clips touch. If you get no reading then the LED probably burnt out. If the LED tests ok you can leave it unplugged and turn on the computer. Set the multimeter to 10 Volts. Touch the red probe to the HDD+ pin and the black probe to the HDD-. DO NOT TOUCH BOTH PINS WITH ONE PROBE OR YOU WILL SHORT IT. Be careful... If you don't get a reading then there is no voltage making it to the pins.
Asus N13219 manual
If You Are Looking For A Manual For An ASUS Mainboard
Model No: N13219 I Give You This Advise:
Try To Find And Download It From The Internet Using Google !
Not finding what you are looking for?