Asko Logo

Asko Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 140 Products
  • 3K Answers
  • 281K Views

yes----- if there are no molded bends
generally the end has to higher that the dishwasher or the water will continually drain out
do not use a length that allows hose to lay on the floor as that will eventually get blocked with rubbish and not drain

Asko Dishwashers | Answered on Aug 05, 2018


Hello John, Welcome to FixYa. I can provide you with an Asko service manual that should guide you on how to remove the panel and anything else you may like to do as well. The service guide I have is an Asko W600 series ( that includes yours ) from Asko in "pdf" so I could attach it to the email address you provide if you give the go ahead. I'll watch for your reply. Regards, Macmarkus :)

Asko W6441 Front... | Answered on Jul 29, 2018


possible temp sensor fault

Asko T712... | Answered on Jul 15, 2018


Your Service Manual is here:

Asko W600 Service Manual

Try pages 20 ~ 22

Anthony

Asko Washing... | Answered on Jul 09, 2018


Hello Helen,

Welcome to FixYa.

To answer your question, "i am trying to open the drain plug to check for buttons etc but cant get it to unlock. is there a trick to it? No not really. Just unscrew it counter clockwise,

however...


The issue with these Asko pump insets/filters....

i.e.

92835c2.jpg

they can become clogged with items such as coins, hair-pins etc. that can actually damage the part.

Unfortunately once they are clogged to a degree removing the filter by normal means becomes difficult or impossible without breaking it.

The image I attached above is an example of a pump I had to remove and disassemble to clean it out so the filter could be removed/unscrewed, hence the need for the "worm-gear" clamps had to be used to replace the original "one-time" clamps. That though involves removing the access panel...

94d902e.jpg
plus the tub bellows and drain hoses etc. pretty involved.

If you indeed break this part during your attempts to remove it, a replacement is available, Asko original part # 88 010 69 and available at on-line retailer "repairclinic.com" for about $25-$30USD.

i.e.

b4835f4.jpg
Let me know how you make out or if you require further assistance.

Thank you for choosing FixYa and good luck.

Regards,

Macmarkus :)

Asko Washing... | Answered on Jun 21, 2018


The top of the dishwasher is supposed to be attached to the underside of the countertop to prevent this problem. Open the door, and look at the top/front of the inside, and see if there are screws there to attach to the underside of the countertop.

Asko Dishwashers | Answered on Jun 18, 2018


Bad contact on the unit's relay would be my guess, but I don't have a schematic handy to confirm.

Asko Dryers | Answered on Jun 17, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Asko Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18455 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34472 Answers

Are you an Asko Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...