Ariston Technologies Recent Questions, Troubleshooting Help & Support

hmm sounds like a spring has busted inside your washer there and the diagnostic computer inside the washer was damaged so its not able to unlock its door....

I would say the control has gone bad.

Maybe get a knob type & eliminate this type of problems

Before you change fuses, do you have an internal fuse board or RCD system in your home? Sometimes, an individual RCD can trip out, locking off sockets. Some sockets are individually set up for up and downstairs in a house, or different rooms. If you have a board or RCDs, check them out :)

I managed to resolve that problem. When you have BOTH F53 and F03 error codes, it's not a sensor fault (although F03 is the big cavity sensor and F53 is the top one)... it's a faulty capacitor trouble. On the main board there are 4 electrolytic capacitors, just replace all of them and you're ok again. It's quite simple and very cheap. :-)

if it looks like a big yellow rubber band, it will stretch to fit being rubber if you heat it up by repeated quick stretching it will be easier to assemble

This is normal , it takes small quantity of water unlikes old washing machines