Ariston Technologies Logo

Ariston Technologies Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 31 Products
  • 1K Answers
  • 83K Views

Has anyone got manual for ariston K-LB 121?

Ariston... | Answered on May 02, 2018


H2O is the symbol for WATER and probably indicates a WATER related fault on your machine. A pressure switch is the normal way the machines 'sense' when the level is sufficient. Overfilling suggests a faulty switch, which will need to be replaced by a technician. Also, ensure that the machine drains as it should, if not, the pump filter may be blocked.

Ariston... | Answered on Apr 04, 2018


Reading the error code

The fault on the appliance is signalled via:

1. the continuous rotation of the selector knob
2. the action, for the first 4', of the electrovalve and the drain pump
3. the door becomes unlocked
4. the led flashes: the number of flashes indicates the fault code; the code should be read as follows:
· each fast flash (2/3 flashes of the led very close together) represents one code value
· the fault code is evaluated by counting the number of flashes occurring at 3/4" intervals from one another
· stop counting when the washing machine waits the equivalent of approximately 8/9" between flashes
· the procedure is repeated by the appliance cyclically

After you determine which the alarm code appeared we will able specifically to help you.

Dado

Ariston... | Answered on Mar 01, 2018


the only thing to do is check that the water censor pipe is not blocked preventing the censor to tell the controller its finished the spin cycle this is a small 5mm pipe leading to wards the top of the machine take it off and blow gently down it you will hear a click and one when you release the air this means the censor is working but the small pipe where it came from is blocked clean the blockage with a pipe cleaner or similar replace the pipe eric

Ariston... | Answered on Dec 26, 2017


go online to https://www.manualslib.com/manual/645321/Ariston-Built-In-Oven.html

Ariston... | Answered on Dec 21, 2017


hmm sounds like a spring has busted inside your washer there and the diagnostic computer inside the washer was damaged so its not able to unlock its door....

Ariston... | Answered on Dec 17, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

57442 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you an Ariston Technologies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...