Ariston Technologies Ovens - Page 8 - Answered Questions & Fixed Issues
Will an oven gas/propane flash sometimes when igniter goes bad?
Question edited for clarity and replace words that don't exist :>D
It is more likely the thermocouple device, which is the safety device that allows the mains gas pressure to enter if there is a good flame to ignite the burner. It can flash whilst it is deciding.
It is a gas appliance so can only be worked on by a registered gas technician. Call for service.
7/1/2023 2:24:00 AM •
Ovens
•
Answered
on Jul 01, 2023
•
28 views
I have a De Dietrich oven (Doc 760 x1) and removed touch screen face plate with sensor buttons, cleaned and replaced, 'buttons' no longer work.
Based on the information provided, it is possible that the touch screen face plate with sensor buttons was not properly reconnected to the receptor behind it. It is also possible that the sensor buttons were damaged during the cleaning process.
To troubleshoot this issue, you can try disconnecting and reconnecting the touch screen face plate to ensure a secure connection. If this does not work, you may need to replace the sensor buttons or seek professional assistance.
It is important to note that attempting to repair or troubleshoot electrical appliances can be dangerous and should only be done by trained professionals.
6/21/2023 8:06:22 PM •
Ovens
•
Answered
on Jun 21, 2023
•
40 views
RM Toledo 110 Fan oven, heats up cuts out. clock also goes off, but dosnet trip the electricity. toggle mains switch set clock and works again, for another ten minutes or so?. the cycle repeats.
The issue you described with your RM Toledo 110 Fan oven can be caused by a few potential factors. Here are some possible explanations and troubleshooting steps you can try:
- Overheating or thermal cut-out: If the oven heats up and then cuts out after a short period, it's possible that the oven is overheating and triggering a thermal cut-out safety feature. This could be due to a faulty thermostat or an issue with the oven's ventilation. Check if the oven's vents are clear and not blocked by any obstructions. Additionally, you may need to have the thermostat checked and replaced if it's not functioning correctly.
- Electrical connection issue: It's possible that there's an electrical connection problem causing the oven and clock to intermittently lose power. Inspect the power cord and plug for any damage or loose connections. Ensure that the oven is securely plugged into a stable power outlet. If the issue persists, it may require the attention of a professional electrician to investigate and repair any underlying wiring issues.
- Control panel malfunction: A malfunctioning control panel or circuit board could cause the oven and clock to intermittently lose power. This could be due to a faulty component or a loose connection. Contact the manufacturer's support or a qualified technician to diagnose and repair the control panel if needed.
- Power supply fluctuations: In some cases, unstable or fluctuating power supply can cause appliances to behave erratically. If you notice other devices or appliances experiencing similar issues in your home, it may be worth contacting your electricity provider to investigate and resolve any power supply issues.
Given the potential safety risks involved with oven repairs and electrical troubleshooting, it's advisable to seek assistance from a qualified technician or contact the manufacturer's support for further guidance. They will have the expertise and knowledge to diagnose the specific problem with your RM Toledo 110 Fan oven and recommend appropriate solutions
6/18/2023 4:07:30 PM •
Ovens
•
Answered
on Jun 18, 2023
•
36 views
I have a Newhome DF500DIT Oven/Cooktop and it won't turn on.
If your Newhome DF500DIT Oven/Cooktop is not turning on, there are a few possible reasons and troubleshooting steps you can try:
- Power Supply: Check if the oven/cooktop is receiving power. Ensure it is plugged into a functioning power outlet and that there is power to that outlet. You can try plugging in another device to verify if the outlet is working properly.
- Circuit Breaker: Check the circuit breaker or fuse box to see if the circuit that supplies power to the oven/cooktop has tripped or if a fuse has blown. If so, reset the breaker or replace the fuse.
- Control Settings: Ensure that the oven/cooktop controls are set correctly. Check that the knobs or buttons are in the proper position for turning on the appliance. Refer to the user manual for specific instructions on operating the oven/cooktop.
- Safety Features: Some ovens/cooktops have safety features that may prevent them from turning on if certain conditions are not met. Make sure that all doors, lids, or safety switches are properly closed or engaged.
- Timer Function: If your oven/cooktop has a timer function, check if it has been set or if there is a delay start feature that may be causing a delay in turning on.
If you have tried these troubleshooting steps and the oven/cooktop still does not turn on, it may be best to contact the manufacturer's customer support or a qualified technician for further assistance. They can provide you with specific guidance and help diagnose and resolve any technical issues with your Newhome DF500DIT Oven/Cooktop.
5/16/2023 7:06:06 AM •
Ovens
•
Answered
on May 16, 2023
•
74 views
Hoover oven hoc3e3158IN, isn't working.
The error code "8888" on your Hoover oven HOC3E3158IN indicates a communication error between the electronic control board and the user interface panel. This can happen due to a power surge or a fault with the control board or the panel.
Here are some steps you can try to resolve the issue:
1. Turn off the power to the oven by unplugging it or turning off the circuit breaker for a few minutes, then turn it back on. (Which you have already done of course). I am just going through the logical steps.
2. Check the wiring connections between the control board and the user interface panel to ensure they are secure and free from damage or corrosion.
3. If the wiring connections are fine, you may need to replace either the control board or the panel. You can try contacting Hoover's customer support or a qualified technician to diagnose and repair the issue.
4. If the oven is still under warranty, you may be able to get a free repair or replacement.
It's important to note that tampering with the oven's electronic components can be dangerous and may void your warranty, so it's best to seek professional help if you're not familiar with electrical repairs.
4/26/2023 5:20:23 AM •
Ovens
•
Answered
on Apr 26, 2023
•
101 views
Not finding what you are looking for?