Ariens Garden - Page 4 - Recent Questions, Troubleshooting & Support

CheckWith PartsTreeRepairClinic they may help

often if you go to the store that sells those type of machines you can buy a replacement engine but you will likely pay almost the cost of the new machine itself. sometimes if you go to a repair shop they will have a separate engine for sale. If you can find it a Briggs engine should fit as well.

try PartsTree.com the may have one you can download

that is because it is a posie trac rear end they all do that

remove the plug and pull it over fix the needle and seat problem in the carby

Sure, Here you go: https://www.snowblowersdirect.com/manuals/Ariens_Man_Pro.pdf

It appears they do not make a separate manual. They seem to offer various procedures and optimizations that you can perform on their website and some basic troubleshooting in the operating manual. A link to Published Service Procedures: http://www.countaxtractorspares.co.uk/help/countax/service-bulletins A Link to the Operators Manual (that you may already have): https://www.manualslib.com/manual/1068349/Countax-C330-Mini.html#manual

brakes pedal pushed in and sitting on the seat? not in reverse make sure blades move freely

change out the glazed or oiled belt

all engines rotate in a clockwise direction You will see a lack of performance in the new motor because the original 16 hp was not big enough to do the job it is good policy when doing a motor transplant to go bigger , not smaller as the money you save on the smaller engine will be lost in the performance difference