Argosy Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support

0helpful
1answer

How to fix sound on Techwood 40940FHD DIGITAL. I have picture but no sound?

Question edited for clarity, 'Techwood' not 'Teachwood', separate the word 'Digital'. Make sure it isn't on Mute. https://www.google.com/search?q=Teachwood+40940FHD+DIGITAL+no+sound
1/7/2023 6:01:54 PM • Televison &... • Answered on Jan 07, 2023
0helpful
1answer

I have a LGPDP50R10100 that when turned on it just keeps clicking why?

The clicking is likely from the power board, but this is the likely scenario if you only have a continuity tester. The voltage in them can blow out IC chips. https://www.fixya.com/support/r29790007-repairing_own_television ..
1/7/2023 10:07:18 AM • Televison &... • Answered on Jan 07, 2023
0helpful
1answer

Is brokfonic MODEL NO.CCVG-3276 a smart tv?

It is possible that this model may be a smart TV, but without more information about the specific features and capabilities of the device, it is not possible for me to confirm this. To determine if your TV is a smart TV, you may want to check the manufacturer's website or the user manual for the device. You can also try looking up the model number online to see if there is any additional information available. If you are still unsure, you can try contacting the manufacturer or a customer service representative for more information.
1/7/2023 10:03:33 AM • Televison &... • Answered on Jan 07, 2023
0helpful
1answer

My devant TV stand by red light keep on blinking and cannot be switched pn?

There could be a few possible causes for the standby light on your Devant TV to keep blinking and the TV not turning on. Here are a few things you could try:
  1. Check the power cord and outlet. Make sure that the power cord is securely plugged into the TV and the outlet, and that the outlet is receiving power.
  2. Check the TV's power supply. If the TV's power supply is damaged, it may not be providing power to the TV.
  3. Check the TV's main board. The main board is responsible for controlling the TV's power and may be faulty if the TV is not turning on.
  4. Check for any loose connections. Make sure that all of the connections between the TV and other components (such as the cable box or DVD player) are secure.
If these steps do not help, there may be a problem with the TV itself. In this case, you may need to have the TV repaired or replaced.
1/7/2023 9:02:05 AM • Televison &... • Answered on Jan 07, 2023
0helpful
2answers

Lc-58q620u turns on goes to set up and after picking language it goes to find remote and gets stuck

If your LC-58Q620U TV turns on and goes to the set up screen, but then gets stuck on the "find remote" screen, there may be a problem with the remote or the TV itself. Here are a few steps you can try to troubleshoot and resolve this issue:
  1. Check the batteries in the remote. Make sure they are fresh and installed properly. If the batteries are low or installed incorrectly, the remote may not be able to communicate with the TV properly.
  2. Try using a different remote to see if it works with the TV. If the TV responds to the different remote, the problem may be with the original remote.
  3. Try unplugging the TV and plugging it back in to reset it. This may clear any temporary glitches or errors that are preventing the TV from responding to the remote.
  4. If the TV still gets stuck on the "find remote" screen, the problem may be with the TV itself. In this case, you may need to contact the manufacturer or a qualified repair technician for assistance.
Overall, if your LC-58Q620U TV gets stuck on the "find remote" screen, the problem may be with the remote, the TV, or the connection between the two. Follow the steps above to troubleshoot and resolve the issue.
1/7/2023 1:54:12 AM • Televison &... • Answered on Jan 07, 2023
0helpful
1answer

White stripe down centre of screen

The screen and the LCD are starting to wear out in your TV and the screen and the LCD are bad.
1/6/2023 10:16:28 AM • Televison &... • Answered on Jan 06, 2023
0helpful
2answers

Vertical problem in panasonic old television

just use zener diode 9v-12v.
1/6/2023 9:31:03 AM • Televison &... • Answered on Jan 06, 2023
0helpful
1answer

Onn 4k TV while on bottom half is black and top half is somewhat clear, any advice of what could cause this?

Parece que el problema probablemente se deba a una tira de LED defectuosa. Es probable que la tira de LED haya fallado y necesite ser reemplazada. Si no se siente c?modo con esto, debe comunicarse con un profesional para inspeccionar y reemplazar la tira de LED por usted. Adem?s, es posible que desee verificar la fuente de alimentaci?n del televisor, ya que esta podr?a ser la causa del problema.
1/6/2023 2:55:58 AM • Televison &... • Answered on Jan 06, 2023
0helpful
1answer

Some DVD have consistent volume, some it cuts in and out

Es posible que haya un problema de compatibilidad entre el reproductor de DVD, el interruptor HDMI y la barra de sonido. Aseg?rese de que todos los componentes son compatibles con HDMI-ARC y que los cables HDMI est?n conectados correctamente. Adem?s, pruebe con un cable o conmutador HDMI diferente y vea si eso resuelve el problema. Si el problema persiste, intente configurar la salida de audio del reproductor de DVD en PCM (PCM lineal). Esto deber?a garantizar que la barra de sonido pueda decodificar la se?al de audio del reproductor de DVD.
1/6/2023 2:50:14 AM • Televison &... • Answered on Jan 06, 2023
0helpful
1answer

Whalen electric fireplace

Yes, they can be disassembled because they assembled them. :>D Just a matter of removing screws. https://www.google.com/search?q=Whalen+electric+fireplace+Model+number+FP26-1A-THW+clean+glass ..
1/6/2023 1:48:00 AM • Televison &... • Answered on Jan 06, 2023
0helpful
1answer

I have a MCI 3300 and trying to connect via HDMI to TV but have not adapter or connection guide please advise

Para conectar su dispositivo MCI 3300 a un televisor, necesitar? un cable HDMI y un adaptador USB-C a HDMI. Para usar este adaptador, simplemente conecte el extremo USB-C al dispositivo MCI 3300, luego conecte el otro extremo a un televisor a trav?s de un cable HDMI. Una vez hecho esto, deber?a ser capaz de ver la pantalla de su dispositivo en su televisor.
1/5/2023 11:31:11 PM • Televison &... • Answered on Jan 05, 2023
0helpful
1answer

My Greenlee DM-20 will turn on but then the screen slowly fades out and at that point it's off I have changed my battery bc it would not turn on at all but now it does the fading

If your Greenlee DM-20 will turn on but then the screen slowly fades out and the device shuts off, there could be several possible causes. Here are a few things you can try to troubleshoot the issue:
  1. Check the battery: Make sure the battery is fully charged and that the connections are clean and secure. If the battery is low or damaged, it could cause the device to shut off.
  2. Check the power supply: Make sure the power supply to the device is functioning properly. If the device is plugged into a power strip or surge protector, try plugging it directly into the wall outlet to see if that fixes the problem.
  3. Reset the device: Try resetting the device by unplugging it from the power outlet, waiting a few minutes, and then plugging it back in.
  4. Check for a firmware update: There may be a firmware update available for the device that could fix the issue. Check the Greenlee website or contact their customer support for more information.
  5. Check for other issues: There could be other issues with the device, such as a malfunctioning display or a problem with the internal components. In this case, it is best to seek the help of a qualified repair technician who can diagnose and fix the problem.
I hope this information is helpful. If you have any further questions or need additional assistance, don't hesitate to ask.
1/4/2023 10:44:35 AM • Televison &... • Answered on Jan 04, 2023
0helpful
1answer

How do i reset my pin code for a rct 100 tv?,

To reset the pin code for a RCT 100 TV, you will need to follow these steps:
  1. Press the "Menu" button on the remote control.
  2. Navigate to the "System" or "Settings" menu.
  3. Select the "Parental Controls" or "Security" option.
  4. Enter the current pin code, if prompted.
  5. Select the option to change the pin code.
  6. Enter the new pin code and confirm it.
  7. Save the changes and exit the menu.
Please note that the specific steps and menu options may vary depending on your specific model of RCT 100 TV and the version of the software it is running. If you are unable to find the option to change the pin code or if you have any difficulty resetting it, you may want to consult the owner's manual or a service manual for your TV, or contact the manufacturer for assistance. I hope this information is helpful. If you have any further questions or need additional assistance, don't hesitate to ask.
1/4/2023 10:24:28 AM • Televison &... • Answered on Jan 04, 2023
0helpful
5answers

Backup the BluRay to my hard drive?

By backup Blu-ray my guess is in BDMV folder, right? All supported video formats of Windows Media Center are listed in here http://windows.microsoft.com/is-IS/windows7/File-types-supported-by-Windows-Media-Center, but no BDMV folder included. So you have to convert it to a supported format like .wmv, .avi, etc, and Pavtube Blu-ray Ripper I have used for couple of years may give you some help and they have a brief guide page to assist you. http://www.blu-ray-dvd-converter.com/guide/play-blu-ray-movie-in-windows-media-center-wmp.html

1/4/2023 3:37:04 AM • Televison &... • Answered on Jan 04, 2023
0helpful
1answer

Remote control not working in case of heating for carreir 42qg24-h

Hi, Please move closer to the unit and test the remote again. If the remote works, then you would probably need to change the battery as the current set (within the remote) seems to be running out of power. If the new batteries do not work, then you might need to get a new remote from the manufacturer as the current remote might have become broken. Thank you.
1/4/2023 1:32:42 AM • Televison &... • Answered on Jan 04, 2023
0helpful
1answer

I wanted to hard reset my dicxon m706 but it gives me options in chinese what now

If you are trying to hard reset a Dicxon M706 tablet and the options are displayed in Chinese, you may need to use a different method to reset the tablet. Here are a few options you can try:
  1. Use the hardware buttons: Many tablets have a specific combination of hardware buttons that can be used to initiate a hard reset. On the Dicxon M706, you may be able to hard reset the tablet by pressing and holding the power and volume down buttons for several seconds until the tablet powers off. Then, release the buttons and wait for the tablet to restart.
  2. Use the Android recovery mode: You may be able to access the Android recovery mode on the Dicxon M706 by pressing and holding the power and volume up buttons until the recovery screen appears. From the recovery screen, you can navigate to the "wipe data/factory reset" option using the volume buttons and select it using the power button.
  3. Use a computer: If you are unable to access the Android recovery mode or initiate a hard reset using the hardware buttons, you may be able to use a computer to reset the tablet. You will need to install the appropriate drivers for the Dicxon M706 on your computer and use software such as Android Debug Bridge (ADB) to perform a hard reset.
If you are unsure about how to perform a hard reset on your Dicxon M706 tablet, it is recommended to seek the assistance of a qualified technician or refer to the tablet's user manual for more specific instructions
1/3/2023 10:42:11 PM • Televison &... • Answered on Jan 03, 2023
0helpful
1answer

I have a TV 139f universal TV remote, my TV is a

here are instructions, there are various codes for Sanyo in the 3rd image, try each until one works. Post back with difficulties or successes25281847-n1rm044d2kbvhi1lhg52tcvk-1-0.jpg 25281847-n1rm044d2kbvhi1lhg52tcvk-1-9.jpg 25281847-n1rm044d2kbvhi1lhg52tcvk-1-13.jpg
1/3/2023 11:49:31 AM • Televison &... • Answered on Jan 03, 2023
0helpful
1answer

How do I bypass the buzzer safely

1/3/2023 8:44:45 AM • Televison &... • Answered on Jan 03, 2023
0helpful
1answer

My TV flickers fast but only when I'm trying to connect my Firestick. Would it a backlight issue or HDMI port issue?

There cold be something wrong with the HDMI ports or the HDMI cable then or there might be a problem with your firestick then. Try a new firestick and a new HDMI cable to see if that helps.If the TV's screen is still flashing then there is a problem with the back light and the LCD for your TV.
1/3/2023 7:36:26 AM • Televison &... • Answered on Jan 03, 2023
Not finding what you are looking for?
Argosy Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Argosy Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6589 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you an Argosy Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...