Apple OfficeJet - Recent Questions, Troubleshooting & Support

1st you dail sending No. and then all the multiple pages on fax machine.

ok you can find the add and remove button in control panel to remove the older version.
go to start menu then control panel

SolutionStep one: Perform a power reset and connect the printer directly into the electrical outlet Remove all the paper loaded in the main input tray.
Make sure that the product is turned off. 
Disconnect the USB cable from the back of the product.
Disconnect the power cord from the product.
Disconnect the power cord from the electrical outlet and wait 10 seconds.
Reconnect the power cord directly into the electrical outlet and check for the following.
Make sure that the power cord used is the one provided with the product.
If a computer is connected to the product, make sure that the computer is connected to a grounded (three-prong) wall outlet.
Make sure that the power cord is firmly connected to both the product and the power supply.
Reconnect the power cord to the back of the product.
Press the power button ( ) to turn on the product.
Reconnect the USB cable to the back of the product.
If the issue is resolved, proceed to Step six: Print a self-test page.
If the issue continues, proceed to the next step.

for more information please go to below link>>

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458822&cc=us&lc=en&dlc=en

Thanks for using FixYa.

Hi I think that you will need to clean the gold dots on the printer carriage or if not done so remove the blue tape from the cartridge or if you are trying to use refills install some originals as this may help.

Hope this helps'
Please rate me
Cheers J

Here is a link to the HP website where you can download the manuals in the language you need. There are options for language on the G85 by entering your country code and the software has a language option also when you install it.

HP Officejet G85 manuals

HP Officejet software

You have the option to download the manuals and software in the language you want. If you continue to have problems just add a comment.
I hope this helps, good luck.

I had the same problem about restarting. But then I switched from parallel to usb and everything worked again. Can't help on the crooked part tho. Sorry!

please specify what printer, model,

Are you using HP cartridges with the printer? there are known problems with non hp cartridges in hp printers.

Consider the HRpart Wireless HDMI Display Adapter. Here are the key details: 4K Screen Mirroring: This adapter allows you to view audio, video, and office documents from a small device (like an iPhone, iPad, or MacBook) on a larger screen (TV, monitor, or projector) without messy cables. It's perfect for presentations, meetings, and exhibitions. Wireless and Easy Connection: Setting up this wireless HDMI adapter is straightforward. You'll need a 5V/2A power source (which can often be provided by a USB port near the HDMI input on modern TVs and projectors). If the port is occupied, a battery pack can also work. No Need for Wi-Fi: The adapter is self-contained and doesn't require an internet connection. Once connected to an HDMI input and powered, it displays a helpful screen for easy connection. You can stream movies, videos, games, and office files from your Apple device to a high-definition TV or projector. Compatibility: This device is more suitable for Apple devices, including iPhone models (such as iPhone 7 Plus, iPhone 8, iPhone XS, etc.), MacBook Pro, MacBook Air, and various iPad models (iPad Pro, iPad Air, iPad mini). However, please note that it does not support HDCP-protected applications like Netflix, Amazon Prime Video, Hulu, and others. You can find this HRpart Wireless HDMI Display Adapter on Amazon 1. Keep in mind that it's designed specifically for Apple devices and provides a convenient way to mirror or cast your screen wirelessly.

https://www.apple.com/apple-pencil/ https://www.youtube.com/watch?v=mxSTHimdNok

Check if the fan on the Op panel side of the machine is running. Ensure the intake on left hand side of machine isn't blocked. Ensure rear vent on right hand back of machine is not blocked.

delete all the drivers of the scanner loaded before.then reload the drivers again and connect the device with your pc when while loading it prompts to connect the wire. do not connect the scanner and pc before loading.connect when the message comes on the screen to connect.it will work.

hi.. there is a lock under the scanner you need to unlock it... lock it to prevent damage while transporting...

Have you set up the printer to print wireless? If so, if you have the computer and printer setup to work together, you should be able to turn the printer on and leave it on and print one job at a time. After it prints one job, it will stop and just be ready and waiting for you to send the next job. No need to turn off between jobs.

When the ink is run past low (to empty) the print head can get damaged. You can also try 2 consecutive DEEP CLEANINGs .. See 'maintenance' in printer driver under advance setting s

Hello,

It's the sensor from tray fault. Try to blow with air spray to sensor, maybe is dirt with paper dust and need clean.

All the best and Happy New Year !