I need to know how to change modes without controller when I'm using a dvd
Without a remote controller, you may have limited options to change modes on your Apex digital TV. However, you may be able to change the mode by using the buttons on the TV itself.
Here are some general steps you can try:
- Turn on your TV and make sure your DVD player is connected to it.
- Look for the "Menu" button on the TV and press it.
- Navigate through the menu options using the arrow buttons on the TV until you find "Input" or "Source."
- Press the "Enter" button to select the input/source option.
- Use the arrow buttons to select the input/source that corresponds to your DVD player.
- Press the "Enter" button to confirm the selection.
- Press the "Menu" button to exit the menu.
Note that the specific steps may vary depending on the model of your Apex TV. You may also consult the user manual for your TV for more information on changing modes without a remote controller.
2/24/2023 9:23:20 PM •
Apex Digital...
•
Answered
on Feb 24, 2023
•
105 views
How to unlock telefunken TV set
I would reccomend the following:
Press and hold in the "display" button on the remote for about 5 seconds.
This worked for me
Thank you,
Regards
6/28/2018 11:13:14 AM •
Apex Digital...
•
Answered
on Jun 28, 2018
•
5,137 views
STATIC BACKGROUND NOISE
The time is the clue static in the background is electrical interference this can be caused by faulty electrical appliances UHF ham and CB Radios etc ask neighbours if and when they suffer this interference this will help to locate and identify the cause ie the closer you get the worse it'll be
Once you identify the source the culprit may decide to fix the appliance desist from operation or you can buy filters to eliminate the cause of static noise once you know the cause
2/3/2018 12:33:04 AM •
Apex Digital...
•
Answered
on Feb 03, 2018
•
86 views
Default video mode
Hello Jennifer,
Do you still have your user manual? This should be answered within your manual.
Best regards,
1/10/2018 6:54:51 AM •
Apex Digital...
•
Answered
on Jan 10, 2018
•
72 views
We have a Apex Digital
Do a reset to this TV, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset).
To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
1/7/2018 12:57:56 PM •
Apex Digital...
•
Answered
on Jan 07, 2018
•
224 views
Not finding what you are looking for?