no model told at allturn the UPS around see rearsee tag see true model # on top of tagtell it first. the post questions.6 LED??on left frontthe manual explains those for sureall 6 stuck on all 6 blinkall 6 sequenceor many binary codes 6 bits wide all in the manual./apc.comRTMhttps://www.apc.com/us/en/download/doc-group-type/67173947443-Manuals+and+Warranties/
model # XS1500??/// always tell full model what matters is not front wordsbut USB rear tag model shows. side tag this oneBX1500G?<< bingo right?the tag coded model shows not only then real model but, version and the country code.!!!it is not only relays.but also the relay control logic that can failand finding that is never easy. due to....apc said it needs service.relay stuck is a better word , not just welded shut.(arc'd)the relays fail all can. (bypass relay top fail)as can control to them failone relay is dead or stuck closedor its input logic to cpu chip is failing inside the UPS.learn to run powerchute app, see logssee errors, if relays are bad or their inputsthe card mobo is bad.APC does not sell cards. sparesnor do that fix them, sent in,the do have service contracts, buying late is no good.they have no schematics real, the service manual has good quasi schematics but the manuals are super hard to source.is is one example of one rare , leakedhttps://www.eserviceinfo.com/downloadsm/90124/APC_apc%20smart-ups%20rt3000%20rt10000.htmlonly some are leakedbest is to buy a good used UPSand use 1 for spare parts.the powerchute 3.1 for it is herehttps://www.apc.com/shop/us/en/products/PowerChute-Personal-Edition-v3-1/P-SFPCPE31the data port uses a special cable to top right rear jack.the powerchute, works, this PC came new with cable and CD.lost that?then read the logs using powerchute.
that is too small for PC.
well if power fails and batteries are now near dead
let them charge back up. or buy a real UPS.
a PC and need 150 watts to do graphic (with monitor more)
so 350watt and 300watt load is fail.
your battery has a short run time. super bad that.
to pick a UPS besides watts (1000w is best)
we ask 2 questions
1: how long does my towns power go out for, calif weeks, or in my town 30mins, in rolling blackouts, summer (HVAC caused)
or how long can you tolerate the lost of power ?
30minutes is a good starting point
the maker APC tells you what UPS fits that profile. for sure.
all UPS makers do every one.
or buy 2 UPS 500w one each for 2 PCs/
your UPS is toy grade,. cheap is almost never best.
do run times first. at at least 100watts per PC, if PC does graphic 3d , 100 is not enough unless you use GTX1650 card. GPU.
The GPU like that is 75watts alone see., NO PC told.
run time is very important.
and when power fails shut down the PC.s
if you must not , like POS sales use, then runtime is extremely important.
one more factor is if power fails all the time and long
that means small batteries go bad faster. lots faster
so the cure is larger batteries. 1000w UPS is what I think you need
no PC told at all. unless is two 25 watt laptops,???????
no model too
but hums and whines and fans and clicking relays all come for free.
and normal.
do all UPS tests pass? no told
no model told at all not even watts.
APC model is on the tag label. like this.
smt3000
s/n:nnnnnnnnnnnn
see line 1 there, nobody can help you lacking that line (model)
no model told at all.
3000watts lost and lost of models none the same.
the battery needs to charge for 4 hours first
as them manual to it states./
the manual also tells what every flashing mode means. too.
learn to RTM first
no 2 UPS are the same even version not the same.
they have no schematics,
the service manual ($$$) shows nice block diagram
you failed to tell full model number
see tag on UPS sticker label
like
SMT3000C
SN/zzzzzzzzzzzzzzzzzzz
see that SMT that means big time facts.
10.3v during test, BAD THIS.
night lite is 1/4watt LED , useless (mostly) as a test use 100watt desk lamp (old skool(sic) not led)
the kind of lamp that burned grandma's hand/ see?
that battery is no good
or was never charged up up but 13.7v proves it was.(kinda)
a battery has many failure mode.
one is dead (0v)
or at 10vdc all the time cell shorted or dead open cell 1 of 6)
or acts like 6 , hearing aid batteries, in series. and 100% end of life and useless now and common after 3 year old or discharged deep 300 times, in your mind imagine old cells , shrinking !
not dead, not good but shrinking and amp/hour is not 7 but 10 times less, called EOL, end of life.
dead
weak
shorted
intermittent
and all are EOL (bat 101 end)
always try new batteries
or learn how to bench test hem ask. the old car lamp test.
https://www.pcdied.com/UPS/SMT-750/APC-SMT.html#battery_test
2200XL
is really a
APC SUA2200XL
true names matter of the service tag.. for sure
your IT guy is savvy, over night reset dead AC no batteries.
this UPS has 6 fault LED top left front.
those are binary codes, and all codes and blink types matter
solid or blink or sequential blinks an beeps too.
besides the savvy brain dead test
the UPS will not run with batteries bad
it runs a self test at turn on and if batteries fail it can not turn on
and stays in bypass mode.
the powerchute business edition and USB cable it will tell you more.
app. free, there.
with new batteries let them charge for 4 hours at least.
before testing run times on inverter. or using inverter at all.
they must be good and changed fully both.
what model is it , rear sticker, shows moldel.APC makes vast 1500watt ups, not told.first replace of first test the batteries, 9 of 10 times bingo EOL batteries. RIPsmt1500bx1500SAU1500? ahh has 6 led faults and the manual covers that.blinks sequentially means AC power lost to the building, wall or breaker to this service panel tripped, loss of POWERpage 11 in your manual read it. it tells both off thoseALL LEDS ARE LIT AND THE UPS EMITS A CONSTANT BEEPINGInternal UPS fault.Do not attempt to use the UPS. Turn the UPS off and have it serviced imme-diately.andFRONT PANEL LEDS FLASH SEQUENTIALLYThe UPS has been shut downremotely through software oran optional accessory card.None. The UPS will restart automatically when utility power returns.
if the battery will not hold a charge it is bad
buy the correct batteries and never ever NOS new old stock
by only correct type NNS, new new stuck ,gee wiz.
what is atlasbx
what APC UPS model is it.?
the rear or bottom white sticker shows model +_ SN
what is model
nobody can guess it.
beeps have vast causes, covered in the manualAC inputs too low or highlightning hits or breakers popped.Line AC input surges.UPS never setup right day1.UPS overloadedUPS battery tests fail.try to load APP called powerchute, BE business edition and see what it shows>? SUA750XLI is one fine UPS I have SMT750c here.this great product has powerchute software and free.to run and see log file and errors in pure English words.learn to use powerchute.. and not work blind.using read USB port to PC and UPS.see error logs, etc.last model is 2008 SUA750XLI ?? sticker rear shows this??????????????????????????????????????????????????https://www.youtube.com/watch?v=NOQq9j2IL_8&t=10s
there are 4 LED on front top what do all 4 do?beeps for many things.LINE AC IN TOO HIghLINE AC IN TOO LOW,.LINE AC DEAD EVEN FOR 1 SECONDS.battery failing self tests beep codes\the codes are in the manual.if the ups fails to run your legit loadswith main wall AC cord pulled the battery is bad9 out of 10 times, this is the cause. BAT.most of these UPS have beeper silence features.in the manual read that, rtm cs500I have this same UPS here, wife CS500and smt750, for me ( super good)apc.comload Powerchute.exe app. it will tell you what failed, PE personal edition there. cost ,free.RTMChirps for 1 Minute Every 5Hours - this alarm is soundedwhenever the battery has failed theautomatic diagnostic testFour Beeps Every 30 Seconds - thisalarm is sounded whenever the Back-UPS is running On Battery. Considersaving work in progress.Continuous Beeping - this alarm issounded whenever a low batterycondition is reached. Battery run-time is very low. Promptly save anywork in progress and exit all openapplications. Shutdown the operatingsystem, computer and the Back-UPS.manualhttps://download.schneider-electric.com/files?p_enDocType=Instruction+sheet&p_File_Name=ASTE-6Z7UZA_R2_EN.pdf&p_Doc_Ref=SPD_ASTE-6Z7UZA_ENif UPS dead some have circuit breaker (fuse)make sure not trippedthat is all on CS line
no model told
RTM, the manual tells you the button does 2 thing or 3.
not just power.
really read the manual first no 2 UPS are the same unless exactly same model #
and dont turn it off at all
that makes the battery last longer (read up on float charging effects lead acid batteries)
button.
on/off
self test
or beeper off.
and more if model told.