Andis Pets - Others - Answered Questions & Fixed Issues
Andis Clippers not locking
Make sure you are putting the blades on with the clippers running otherwise the blade will not locate correctly. Failing that it could b e a broken 'latch'
AGC
6/6/2015 9:58:41 AM •
Andis Dog...
•
Answered
on Jun 06, 2015
•
731 views
Why wont my clippers power up
try moving the power cord where it exists the clipper, if it shows any sign of starting up then its probably a faulty cable.
6/6/2015 9:51:54 AM •
Andis Dog...
•
Answered
on Jun 06, 2015
•
391 views
How do I get my clippers to cut?
Try giving the blade an extra 1/2 a turn of tension, done by turning the red knob 1/2 a turn clockwise. It sounds as though the blades are jamming up which could be a lack of tension.
3/3/2015 4:34:06 AM •
Andis 68035...
•
Answered
on Mar 03, 2015
•
438 views
My clipper smoked and now it wont run at all
Sounds like your motor went out. You might as well buy new clippers for the price to fix them. One thing that causes that is when you spray your coolant to not hold your clippers blade up. Keep them blade down. The coolant can run into your clippers and burn them up. You only want to use grease inside your clippers.
Why is clipper over heating
Either your blades need cleaning and oiling or it's possibly a faulty armature without testing the clippers and part mentioned with a multimeter it's hard to say.
Armature
Blade not staying on tight
If you can pull the blade away from the clipper without pressing the blade release button then either the hook on the Latch is broken (which will mean all blades have the same problem) or the blade socket on the blade may need adjustment or replacement. Please view the part in question
Latch
Not finding what you are looking for?