Andis Pets - Others - Recent Questions, Troubleshooting & Support

Well you can either buy a new one from a local shop

Or wait a while and send them off for sharpening

Andis Dog... | Answered on Nov 06, 2016

The blade latch may be broken or not engaging correctly

Andis Agp 2... | Answered on Nov 16, 2015

Make sure you are putting the blades on with the clippers running otherwise the blade will not locate correctly. Failing that it could b e a broken 'latch' AGC

Andis Dog... | Answered on Jun 06, 2015

try moving the power cord where it exists the clipper, if it shows any sign of starting up then its probably a faulty cable.

Andis Dog... | Answered on Jun 06, 2015

pretty easy follow the instructions on this page

Andis Excel... | Answered on Jun 06, 2015

they dont make a 5 speed thats probably why.

Andis Excel... | Answered on Mar 03, 2015

Try giving the blade an extra 1/2 a turn of tension, done by turning the red knob 1/2 a turn clockwise. It sounds as though the blades are jamming up which could be a lack of tension.

Andis 68035... | Answered on Mar 03, 2015

If it's new, why not contact the seller for a refund?

Andis 22215... | Answered on Mar 03, 2015

You need to replace the motor and the PCB. The motor is drawing too much current, that's what has wrecked the PCB. If the armature is a separate available part rather than a complete motor then it will be the armature you need.

Andis Dog... | Answered on Feb 05, 2015

Sounds like your motor went out. You might as well buy new clippers for the price to fix them. One thing that causes that is when you spray your coolant to not hold your clippers blade up. Keep them blade down. The coolant can run into your clippers and burn them up. You only want to use grease inside your clippers.

Andis Agc Super... | Answered on Feb 05, 2015

whilst pushing the release button (latch) you must also pull the front of the blade away from the clipper.

Andis Agc... | Answered on Feb 05, 2015

sometimes it is the blade and not the clipper

Andis Agc Super... | Answered on Feb 05, 2015

Try the fuse in the plug first then try to move the cable where it enters the clippers it may just be a faulty cable.
Otherwise it will need stripping apart and testing, Sorry

Andis Excel... | Answered on Nov 21, 2014

RTM. Read the manual. You can find a manual for the make and model on Google.

Andis Pmt1-23475... | Answered on Nov 21, 2014

Not finding what you are looking for?
Andis Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Andis Pets - Others Experts

Tom Chichester

Level 3 Expert

61336 Answers

Ruth summersides

Level 3 Expert

1488 Answers


Level 3 Expert

6126 Answers

Are you an Andis Pets - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides