AMI Answered Questions & Fixed Issues

https://files.winwithp1ag.com/products/jukeboxes-photobooths/jukeboxes/AMI-Entertainment-NGX-Manual.pdf

hi What model is your Rowe Ami jukebox, there will be an information label on the back or inside the jukebox with the serial number and the model type. We can suggest a solution once we know your model type. Testimonial: "Hi Alan Do you have a website etc as I have two jukeboxes both AMI Rowe, one is a Ti2 this has a speed and selector,problem, the newer one I just need guidance on it plays ok this is an R-91 Many thanks Lisa"

Power on password COMMING hasee laptop

Family gathered around her as of 9/22... (photo op) No recent news... I have been able to discover. https://www.thehollywoodgossip.com/2017/09/ami-brown-hospitalized-again-unfortunately

http://www.pinballjukeboxrepair.com/ http://www.antiquepinball.net/Jukebox-Sales-Jukebox-Repair.html https://www.ahjbs-jukeboxsociety.com/repairparts-links https://www.yellowpages.com/berlin-nj/jukebox-repair

your question is in the wrong section. questions in this section are for computers, more specifically desktops.

What is your Operating System?

click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers

if your computer came with a motherboard disk the drivers could be on it

or you might download slimdrivers

rather doing a driver hunt

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

note: it will find all of your outdated drivers

this is a free driver solutions

which will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

it might take some time being free also http://download.cnet.com/2000-20_4.html

just type in what you want or need be specific you might have to try a few times to get it right

IE: motherboard name sound drivers

hope it helps

Hi Jim,You can purchase the service manual from an online store. Here is the link to an online store.Regarding the original problem, please post the problem under the appropriate category on FixYa website so that the best experts in that category can view and post the solution. (You have posted the question under computer motherboards section)Thanks for using FixYa.

if you are referring to your cd rom driver
Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete After deleting the keys, close the registry editor Reboot your computer Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. or you might have to physically unplug the leads for this cd/dvd then plug them back this should activate the found new hardware wizard or you might have to uninstall then restart your computer then reinstall your DVD/CD then reinstall the driver for this device if your computer came with a motherboard disk the drivers could be on it click start control panel administrive tools computer management device manager scroll down cd dvdrom drives if you see a yellow question or exclamation mark?! or a red x right click you will need to update the driver or select properties general troubleshoot, select driver click to reinstall drivers click update driver hope this helps

We would issue remote shutdown commands and sometimes
the system wouldn't completely shutdown and it went into the undead state.
Anyone connected to the machine still worked but no new connections allowed
and no access to the console. Found out from Microsoft the shutdown command
isn't the greatest and so I wrote a VBScript that has resolved the issue.

This isn't the greatest code in the world, I should correct it so the values
are all defined in the variables section but use it if you find value to it.


Option Explicit

''''''''''''''''''''''''''''''''''''''''''''''''''

' Program - RemoteReboot.vbs '

' Author - Paul Bergson '

' Date Written - 08/15/07 '

' Description - Is a more drastic remote reboot '

''''''''''''''''''''''''''''''''''''''''''''''''''

Dim OpSysSet

Dim OpSys

Dim strComputer

Dim iMsg

Dim iConf

Dim Flds

Dim strSubject

Dim strHTML

on error resume next

strComputer = WScript.Arguments.Item(0) 'Get server name

If WScript.Arguments.Count = 1 Then

Set OpSysSet = GetObject("winmgmts:{(Shutdown)}\\" _

& strComputer _

& "\root\cimv2").ExecQuery("select * from Win32_OperatingSystem where
Primary=true")

For Each OpSys in OpSysSet

OpSys.Reboot()

Next

Else

Wscript.Echo "Server Name required. Reboot operation Aborted!"

Wscript.Quit

End If


'Send out an e-mail on the reboot

set imsg = createobject("cdo.message")

set iconf = createobject("cdo.configuration")

Set Flds = iConf.Fields

With Flds

..Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2

..Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") =
"Yoursmtp.YourDomain.com"

..Update

End With

strHTML = strComputer & " has been automatically rebooted by YourServerName"
_

& " on " & FormatDateTime(Date(),1) & ", " & FormatDateTime(Time(),3)

strSubject = strComputer & " has been rebooted"

With iMsg

Set .Configuration = iConf

..To = "Notification [email protected]" ' Destination e-mail address

..From = "[email protected]"

..Subject = strSubject

..HTMLBody = strHTML

..Send

End With

set imsg = Nothing

set iconf = Nothing

check your pc RAM, HARD DISK.

please i need help on my computer
its about a beeping sound when i switch it on

Go to AMI website and download new copy of the files you need. If not available you may have to order a new CD.

You try to clean the lens of dvd player, if not works, avail the warrenty

This is a strange one. Does the BIOS on your motherboard detect your hard drives at all? I'd try the lowest level first. If so, then try to boot from your XP CD ROM (hopefully this should work). Try to go into recovery console to see if your hard drive can even be mounted by the system. I'd check there.

If you still have issues,try to reflash your mobo BIOS to the most current one. Could be a flaky BIOS issue.