Amerock Hardware & Accessories - Page 4 - Popular Questions, Answers, Tips & Manuals
Sunquest pro 24 turned on and shut off after a few mins
Based on the symptoms you have described, it's possible that there may be an issue with the ballast or the lamp in your Sunquest Pro 24 tanning bed.
Here are some steps you can take to troubleshoot the issue:
- Check the power source: Ensure that the tanning bed is plugged into a working electrical outlet and that the outlet is supplying the correct voltage. You can use a voltage tester to check the voltage.
- Check the ballast: The ballast is a device that regulates the electrical current to the lamp. If the ballast is faulty, it may prevent the lamp from lighting up. Check the ballast for any visible damage or loose connections. If you're comfortable with electronics, you can also use a multimeter to check the ballast's continuity.
- Check the lamp: If the ballast is functioning correctly, the issue may be with the lamp. Check the lamp for any visible damage or dark spots. You can also use a continuity tester to check the lamp's continuity.
- Check the timer: If the timer is not functioning correctly, it may prevent the tanning bed from turning on or lighting up. Check the timer for any damage or loose connections.
If you're unable to identify the issue, it's best to contact a qualified technician or the manufacturer's customer service for further assistance. Tanning beds use high-voltage electrical components that can be dangerous if mishandled, so it's important to take proper precautions and not attempt to repair the tanning bed yourself unless you're experienced with electronics.
11/26/2022 11:16:13 PM •
Hardware &...
•
220 views • 0 helpful votes
How to program my timer to turn my lights on at 5pm and off at 10pm MODEL YLT-10
This timer is made by Living Solutions. It's best to set the timer prior to plugging it in.
To set current time:
Lift protective cover and set the current time by rotating dial CLOCKWISE until the arrow on the side of dial aligns with the correct time.
Note: Timer dial will rotate COUNTER-CLOCKWISE when operating.
To set timer:
Move timer arms (located around the dial) towards the middle of the dial for the time you would like the timer OFF.
Move the arms towards the outside of the dial for the time you would like the timer ON.
Release protective cover.
12/10/2022 9:01:18 PM •
Hardware &...
•
102 views • 0 helpful votes
Operating instructions for ekco timer
Hi,
It seems like your device is being sold on websites like amazon and ebay. Your best move might be to request the instructions from one of those sellers and ask them to send it to you as an individual product. Otherwise, you might have to reach out the librarian at a local college or technical college to ask if they could provide you the instructions that you're seeking.
Thank you.
12/26/2022 3:01:50 PM •
Hardware &...
•
49 views • 0 helpful votes
Brief power outage. Light timer not working.
If there was a brief power outage and your light timer is not working, there are a few steps you can take to troubleshoot the issue:
- Check the timer settings: Make sure that the timer is set correctly and that the time and program settings are accurate. If the timer has lost power, it may have reset and will need to be reprogrammed.
- Check the power source: Ensure that the timer is receiving power by checking the outlet or circuit breaker that it is plugged into. If the outlet or breaker has tripped, reset it and try again.
- Check the timer battery: If your timer has a battery backup, check the battery to make sure it is still functional. If the battery has died, replace it with a new one.
- Reset the timer: If none of the above steps have worked, try resetting the timer to its default settings. Refer to the user manual for instructions on how to reset the timer.
If the above steps do not resolve the issue, it's possible that the timer has been damaged due to the power outage. In this case, you may need to replace the timer or seek the assistance of an electrician to diagnose and repair the problem.
10/13/2022 12:42:07 AM •
Hardware &...
•
180 views • 0 helpful votes
Wiring diagram for Mastercraft RT550B rotary tool
The black line wire connects to the negative (-) terminal on the circuit board. You may find wiring diagrams for specific products online, or you can reach out to the manufacturer for detailed instructions.
10/21/2022 4:55:49 PM •
Hardware &...
•
51 views • 0 helpful votes
Radio cobra 200 gtl n9 transmite ni se mueve la aguja donde le mueve pa transmite
Suena como si pudiera haber un problema con el transmisor de su radio Cobra 200 GTL N9. Es posible que la fuente de alimentaci?n de la radio no est? proporcionando suficiente energ?a al transmisor, o que el transmisor no est? conectado correctamente. Debe verificar la fuente de alimentaci?n para asegurarse de que est? conectada y proporcione el voltaje y la amperaje correctos a la radio. Tambi?n debe verificar todas las conexiones entre el transmisor y la radio, incluidos el cable de antena y el cable del micr?fono. Si las conexiones est?n seguras y la fuente de alimentaci?n funciona correctamente, entonces el problema puede estar con la radio misma y es posible que necesite ser atendida por un profesional.
10/26/2022 4:05:36 PM •
Hardware &...
•
45 views • 0 helpful votes
Not finding what you are looking for?