American Standard Logo

American Standard Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 681 Products
  • 4K Answers
  • 338K Views

American Standard has the Installation Guide for some of their kitchen faucets on each product's page. A list of some of their two-handle kitchen faucets is available here: https://www.americanstandard-us.com/kitchens/kitchen-faucets?No.%20of%20Handles=Two&page=1&plimit=21 . Home Depot has the Installation Guide for the Heritage wall-mount faucet with Goose Neck spout on the product page: https://www.homedepot.com/p/American-Standard-Heritage-2-Handle-Wall-Mount-Kitchen-Faucet-in-Polished-Chrome-with-Gooseneck-Spout-7293-252-002/100080273 . The current link to the guide is https://images.homedepot-static.com/catalog/pdfimages/de/deca2fce-73fc-47a2-acb5-efc7232dac17.pdf .

These are standard plumbing installation guides. They condense most of the steps of the hardware install into one diagram/step of the guide.

I hope this helps. If you need further assistance, please add more information on the style of your faucet. (Is it a wall-mounted faucet or a sink-mounted faucet?)

Cindy Wells

American... | Answered 3 days ago


I had the same issue with an American Standard faucet that I installed new 6 months ago. The diverter can be the issue if you have a sprayer attachment. Try unscrewing the sprayer head from the hose it's attached to. Now run the water full pressure with the hose pointed into the sink, obviously :~). After running the water for about 1 minute, connect the sprayer head back onto the hose, make certain the flat rubber washer and ring gaskets are seated in their grooves properly, and tighten until you have no water leaking from the sprayer head/hose connection. Now try the water through the faucet. If the problem was a temporary diverter issue, your pressure should be fine now. Good luck

American... | Answered on May 24, 2020


Had error code 91 on Trane XL19i thermostat. Heat season on duel fuel system. Repair tech said board is bad ($963) and transducer ($1000). Unit is 3 ton 12 years old. Does it make sense to repair or put in a new unit?

American... | Answered on Feb 21, 2020


possible no 120 volt to unit check fuse and start up capacitors if ok fan motor

American... | Answered on Dec 24, 2019


Download the BILT app and search for your faucet model. The icon is turquoise with a white nut ( as in nut and bolt).
It will show you step by step nearly everything under the sun. Hope that helps a bit.

American... | Answered on Nov 09, 2019


No, sorry but if it used to work it is unlikely to fail so soon. Check the hot water supply first.

American... | Answered on Sep 29, 2019


sometimes theres caps on top pop the cap and tighten the screws and sometimes there are nut or wing nuts on the bottom...simple enough for you?

American... | Answered on Sep 06, 2019


Depends how old your toilet is, it may be a calcium build up problem on your little inlet pipe inside your tank, but first check your water shut off valve on left side of your toilet near the wall....It may not be open all the way OR the valve has an issue...

American... | Answered on Jul 12, 2019


Hey, One thing is that maybe there might be some loose plastic shavings in the fill line. From the Factory? or maybe was inside the water line going to the toilet when you connected the line to toilet. Shut off the water and get some towels and something to catch the water and disconnect it from the toilet and use bowl or what ever to catch the water and slowly turn it on and see if anything comes out. Maybe if it is in the line inside the toilet it might fall out by lightly tapping on the fill line inside the toilet to help it fall out. Just a thought when you said it "Sings" that sounds like trash inside the line going to the filler tube and bowl, hey try it who knows it might work. Okay

American... | Answered on Jul 12, 2019


High and low voltage AT the motor with no motor function is a bad motor. Should have 12 to 13 volts DC on r+ and r- (I believe are the correct terminals) You must test this when the machine is trying to run. Yes, it's dangerous, hire a licensed contractor!!

American... | Answered on Jun 21, 2019


check voltage to unit if ok check ignitor

American... | Answered on May 23, 2019


Hi,

First, carefully remove your tank lid, and place it where it won't break or fall. Look for a four-digit number located on the back of the tank, near the water level mark. This is your tank model number. If the number starts with a two, it is a one-piece toilet.

Then....visit this link:
https://www.americanstandard-us.com/parts-support/faqs/toilets

Good Luck!

American... | Answered on May 06, 2019


low pressure cut out. refrigerant leak

American... | Answered on Mar 26, 2019


american standard error of 156... on a car? If PO0156, thats an ODB2 sensor... possibly the second O2 sensor on your emission system. You can reset the code and see if within 100 miles it lights back up... Likely it will. You may have a burned out catalytic converter... or a bad O2 sensor... or a blown head gasket, or many other things. If that is the ONLY code I would go forward with the O2 sensor. Look it up on ebay, year, make and model of car. Typically if one o2 goes, the other will follow. It is symptomatic of the cat going out though. How many miles on the car? More than 150,000? Likely its the catalytic converter. They are a consumable in your car. It will affect your mileage significantly while the code is on, and typically if it is the o2 sensor itself that has gone bad ( between 30 and 100$ per) and the cat is ok, if you don't fix the o2 sensor, the cat will burn up (cost between 200 and 700, and a bunch to swap out) Get it checked out, you're looking at more bucks the longer you wait

American... | Answered on Feb 24, 2019


are you running a schedule? try the permanent hold!!

American... | Answered on Feb 15, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top American Standard Experts

Bill Johnson

Level 2 Expert

306 Answers

Fahr Quad

Level 3 Expert

774 Answers

Tom Chichester

Level 3 Expert

56011 Answers

Are you an American Standard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...