Amana Logo

Amana Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

Means an HEating (heating) error. You may have a burned-out heating element, or an open thermal fuse.

Amana Dryers | 128 views | 0 helpful votes


Defective cycle timer or a defect in one of the elements controlled by the timer

Amana Washing... | 43 views | 0 helpful votes


Possibly the filter both air and water. Make sure the lines aren't frozen. If the unit has an ice maker you can warm the lines with a blow dryer ( warm on low fan) make sure it's level. Is the trim gasket around the door worn?

Amana... | 81 views | 1 helpful votes


Is it heating the water? Many machines won't continue the wash cycle if the water temperature isn't achieved. Usually caused by blown heater element. I'm not familiar with your machine but generally it's a matter of removing the back panel, disconnect the terminals to the heater element, undo fixing bolt and pull it out. Should have a resistance of around 50 ohms, but if you're water isn't getting warm it's probably open circuit, ie infinitely high resistance. Replacement element is usually around £20.

Amana Washing... | 120 views | 0 helpful votes


Here's a YouTube video describing how to do this.

https://youtu.be/uTJ2umLoaKo

Amana Dryers | 172 views | 0 helpful votes


A repair manual would have to be ordered directly from Amana.

Amana Dryers | 146 views | 0 helpful votes


You need to call customer service or that info. It still should be under warranty, check and if so call for service.

Amana Dryers | 147 views | 1 helpful votes


Remove top and front panel on dryer to access drum and replace drive belt. https://www.6ya.com/callphilipforhelp

Amana Dryers | 112 views | 0 helpful votes


check manufacurer tech support for info

Amana Heating &... | 77 views | 0 helpful votes


Theres a few solutions that could fix this. 1st I would let the unit thaw out could have ice built up on the air passage that wont allow the air to travel freely. Some caused by not having a good seal around the door.

Amana... | 68 views | 0 helpful votes


Check voltage in , there could be one side of breaker burned causing only one side to come through. This happens on older main breakers frequently which messes up whole house.

Amana Heating &... | 76 views | 0 helpful votes


Clogged screen on water valve. Turn off both water faucets.Remove hose from valve. Pop out mesh or plastic screen. May be debris. Could be low pressure too if this doesn't help.

Amana Washing... | 46 views | 0 helpful votes


check to see if spins if ok check water solenoid

Amana Washing... | 75 views | 0 helpful votes


There should be a fan symbol on your remote control. In the "mode" control, there should be the following options.. Heat, cool, Auto and fan. If you select fan, only the fan will run. No heating or cooling.

Amana Heating &... | 44 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amana Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6100 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you an Amana Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...