Al Agnew Watches - Recent Questions, Troubleshooting & Support


if you know the movement you can search on how to do this, There normally is a lever or a push pin hold that needs to be pressed down to remove the stem.

Al Agnew Watches | Answered on Oct 07, 2018


Take your watch to your nearest watch shop and ask them to do it for you.

You can get into difficulty replacing batteries and it is not worth the risk for the small cost saving in doing it yourself.

Al Agnew Al Ag 3... | Answered on Mar 03, 2010


Often with battery powered watches the word "Quartz" will be written on the dial. In the abscent of that you can look at the mechanism inside (typically by removing the case back).

Alternately (this may not be an absolute confirmation) with the winder in neutral position i.e. pressed all the way in, turn the crown (winding button) and if it spins freely it's probably quartz. Because unless it's broken most mechanical watches click as the watch is
wound up (except some automatics which cant be crown wound).

Plus if it's working and left unworn for a few days yet continues to run it's probably quartz.
Please rate this solution.

Al Agnew Al Ag 3... | Answered on Jul 27, 2009


this is a repair help website. we dont sell buy or value anything here

Watches | Answered 6 hours ago


Try a jewellery shop or a watch maker.

Watches | Answered Yesterday


Have a jeweler and a person that repairs and fixes jewelry to see if it can be able to be repaired or not.

Watches | Answered Yesterday


You could have a person that fixes and repairs watches to have a look then and see what can be done.

Watches | Answered Yesterday


To change the clock format, visit the General section of Momentum's Settings ??, scroll down to the Clock Format option and then click 12 hour or 24 hour to the right of it. When you switch to the 12-hour format, the AM/PM unit will display for a moment and then fade away to keep the interface clean.
https://get.momentumdash.help/hc/en-us/articles/360022896993-How-can-I-change-the-clock-format-12-hour-24-hour-

https://www.youtube.com/watch?v=VfthmmTM7Oo

Watches | Answered on May 21, 2020


a jewelry store or a clock repair store

Watches | Answered on May 17, 2020


https://www.youtube.com/watch?v=Hj1lKEULXAI

Watches | Answered on May 13, 2020


Press "mode" until the hour is flashing,
Now press "start" to change the hour. When hour is correct, press "reset" and minutes should start flashing.
Press "start" to change minutes" then press "mode" again.

Watches | Answered on May 09, 2020


move the plastic button at the back slightly to the right side where it says "Time" and than adjust the time by pressing 'Mode' and 'Up/Countdown' buttons

Watches | Answered on May 02, 2020

Not finding what you are looking for?
Al Agnew Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Al Agnew Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76321 Answers

Are you an Al Agnew Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...