AEG Ovens - Page 6 - Recent Questions, Troubleshooting & Support

the control panel usually .

AEG Ovens | Answered on Jan 25, 2016

See the picture below: Position 10



AEG D5701-4... | Answered on Nov 07, 2015

E6 - Defect Induction module or over temperature of coil sensor with Falcon User interface with production date before 2010

Defect Induction module
- Disconnect the appliance from the mains for 30 sec. If alarm still occurs after 1 min operation exchange induction module.

Over temperature of coil sensor with Falcon User interface with production date before 2010
- temperature sensor defect or wrong mounted.
  1. Check connector at induction module.
  2. Check the coil sensor, it should be placed even in the silicon carrier.
  3. Appliances with 3 zones, is the "Dummy" temperature sensor at the 2nd terminal mounted?
  4. Exchange coil with sensor.
  5. If above is without success, exchange induction module.


AEG Ovens | Answered on Nov 07, 2015

Oven Lighting
Warning: There is a danger of electric shock! Prior to changing
the oven light bulb:
  • Switch off the oven!
  • Disconnect from the electricity supply.
Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
  1. Remove the glass cover by turning it anticlockwise and then clean it.
  2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C heat-resistant
oven light bulb.
3. Refit the glass cover.


AEG Ovens | Answered on Nov 07, 2015

Unfortunately, this isn't a wiring diagram but can also serve.

See the pictures below:




AEG Ovens | Answered on Nov 07, 2015

Please, follow this link:

25358477-ou0pu244fjwiiyewsm5u145c-2-0.jpg 6. CARE AND CLEANING WARNING!
Refer to Safety chapters.
6.1 General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have no effect on how the hob operates.
• Use a special cleaner applicable for the surface of the hob.


AEG Ovens | Answered on Oct 15, 2015

Hi,phone the help line on the information book that came with the cooker,ask them what the code means,and weather you are aloud to fix it.(if its gas health and safty)

AEG Ovens | Answered on Sep 07, 2015

usually located inside the oven door along the edge or in the oven drawer pull it out and look

AEG Ovens | Answered on May 11, 2015

spray with oven cleaner leave for a day then try again

AEG Ovens | Answered on Apr 30, 2015

The glass cover unscrews counter clockwise and removes to be able to access the bulb itself. Note there may be a guard that has to be removed before accessing the glass cover

AEG Ovens | Answered on Apr 17, 2015

Not finding what you are looking for?
AEG Logo

486 questions posted

Ask a Question

Usually answered in minutes!

Top AEG Ovens Experts

Jason Harris
Jason Harris

Level 2 Expert

274 Answers

Cindy Wells

Level 3 Expert

6073 Answers


Level 3 Expert

85223 Answers

Are you an AEG Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides