AEG Ovens - Recent Questions, Troubleshooting & Support

0helpful
1answer

AEG U7101-4-M Bottom oven not working

had same fault its a temperature switch at back of oven, you have to remove panel and is located half way up on left and has two spade terminals coming out the back.
10/18/2022 3:45:13 PM • AEG U7101-4... • Answered on Oct 18, 2022
0helpful
2answers

AEG Induction Cooker. Replacing the bottom element in the lower oven?

Question edited for clarity. Check out the videos. It does depend on the model. https://www.google.com/search?q=AEG+Induction+Cooker.+Replacing+the+bottom+element ..
8/28/2022 9:51:37 AM • AEG Ovens • Answered on Aug 28, 2022
0helpful
2answers

AEG Competence Double Fan Oven Fault

Sounds like oven element is faulty, disconnect it and try again, if it does not trip, then it is definately the element..
It is easy to replace.
Plz leave feedback.
3/12/2022 7:45:37 AM • AEG B2100-4... • Answered on Mar 12, 2022
0helpful
2answers

Oven takes 15 minutes till it shuts down

All ovens take a long time to cool, if that is your question.
3/6/2022 5:53:47 PM • AEG Ovens • Answered on Mar 06, 2022
0helpful
1answer

AEG B5741-4-m trips consumer unit!

it could or a short in wiring ---circuit need a meter and test the system
2/9/2022 12:48:12 PM • AEG Ovens • Answered on Feb 09, 2022
0helpful
1answer

AEG Competence BE5304001M Oven, fan heating element

CALL A LOCAL REPAIR SERVICE
1/10/2022 12:17:22 PM • AEG Ovens • Answered on Jan 10, 2022
0helpful
2answers

Went to switch oven on

HI, Sounds like your from the UK
If you are referring to a trip switch as being equivalent to an American circuit breaker. (Electrical safety device designed to shut down power to an electrical appliance). Then we are on the same page.
Do the following diagnostic procedure:
1 SHUT DOWN THE POWER SUPPLY TO THE OVEN. I.E. THE TRIP SWITCH/CIRCUIT BREAKER.
2 Open the oven door and look very carefully with a flashlight at the heating element. Look at the the entire element. If it blew (similar to when a light bulb blows) you will
find white powder around the hole in it or it will be completely broken, or have bubbles in it. Some indication like that. If so it has failed and must be replaced. It is probably tripping the switch because it is shorting out somewhere. There is also the possibility that the internal wiring connectors to where the element is mounted into the oven walls is broken off and short circuiting against the oven chassis (walls). That being the case, it may be just a wiring repair in which you install new appropriate electrical contacts and re-connect the element.
Hope this helps,
Happy New Year,
Mark
12/7/2021 2:15:35 PM • AEG B3101-4... • Answered on Dec 07, 2021
0helpful
1answer

Aeg oven taking over 25 minutes just to heat

You can tell if the fan is working, you will hear and see it. If the element was bad, it wouldn't get hot at all. If the thermostat was faulty, it usually goes short circuit and makes the element glow in time because it won't regulate the heat. There are a couple of possibilities left; Wrong element, too low a wattage. Bad connection to the element.
10/26/2021 7:13:00 AM • AEG Ovens • Answered on Oct 26, 2021
0helpful
1answer

Oven trips RCD

Check for loose connections on or near the element. Heat form the element could be causing the connection to expand causing arching and tripping the MCB.
8/8/2021 10:14:51 AM • AEG U3100-4... • Answered on Aug 08, 2021
0helpful
1answer

Can you please tell me

If you are just curious and its working turn on for 1 min then (after switching off) have a feel inside. If it is opened follow the wires.
8/8/2021 10:10:14 AM • AEG D2100-4... • Answered on Aug 08, 2021
0helpful
1answer

AEG competence gas top electric oven.. The Oven is not working, no timer lights or any of the elements heating etc works

Check breaker has not triped in main box . and fuse on oven check wires to oven
7/20/2021 6:37:45 PM • AEG Ovens • Answered on Jul 20, 2021
0helpful
1answer

My fitted electric AEG Competence oven door has locked and I don't know how to undo it

My oven AEG Competence Pyrolitic, door locked itself...now is locked and appears SAFE ou Lok or error F101.. We never use pyrolitic system or ever locked the oven door.. Could you tell me how do you resolved?Regards
8/4/2020 9:30:41 PM • AEG B2100-4... • Answered on Aug 04, 2020
0helpful
1answer

My AEG is coming up with 'F130' after I turn the oven on and cuts out. All functions bring up the same code.

I saw an Electrolux built-in oven showing error code F130 and having a faulty coil in its cooling fan motor. Fixing the motor made the oven operative again, so i guess these are correlated.
6/2/2020 10:50:13 AM • AEG B5741-4... • Answered on Jun 02, 2020
0helpful
1answer
0helpful
1answer

My AEG oven B9879-4-worked perfectly tillI switched it off to clean. When I switched the power back on the menu is frozen at LAnguage. How do I sort this?

Check the instruction book for setup. I think there is a procedure for startup. On my oven I have to press two buttons at once to get to the menu.
5/5/2019 8:46:40 AM • AEG Ovens • Answered on May 05, 2019
Not finding what you are looking for?
AEG Logo

502 questions posted

Ask a Question

Usually answered in minutes!

Top AEG Ovens Experts

Steve

Level 3 Expert

3290 Answers

Cindy Wells

Level 3 Expert

6557 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you an AEG Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...