AEG Freezers - Page 5 - Recent Questions, Troubleshooting & Support


the alarm is there to warn you that the freezers not up to set tempature.. The reason as I see what you wrote would be a stuck or burnt out auto defrost timer motor. or the units got a leak in the refrigerant line??? good luck

AEG 3.32 cu. ft.... | Answered on Aug 29, 2008


good place to start is the starting device for the compressor.slip the cover off the compressor electrics on lhs of compressor usually and you may find the relay burnt out.tyhis is the mostly area but if elsewhere, look at the defrost element and check wiring loom

AEG 7.59 cu. ft.... | Answered on Mar 28, 2008


It's a freezer. The temperature should be minus 18.C, yours is showing 0'C. It is telling you the freezer is 18' hotter than it should be.
https://www.defy.co.za/amfile/file/download/file/166/product/1996/

..

Freezers | Answered on Jan 10, 2021


Check with an appliance parts supplier to determine whether the Ranco unit is a specified replacement for the Beaumark. Also, it is possible that the Ranco thermostat is defective, though new.

Freezers | Answered on Jan 01, 2021


Probably the blinking green light is an indication that something is wrong with the compressor or a related component.

Freezers | Answered on Dec 14, 2020


That unit is surprisingly clean. It may have had the fan module that you can see in picture, replaced and whomever replaced it, did not put the lug back on or it was not there with the newer unit.

Freezers | Answered on Nov 21, 2020


Clicking sound is overheat at the compressor. There is a device called a Clixon that is cutting and restarting. Remove covers and clean the condenser grill with a vacuum cleaner and brush.

Freezers | Answered on Oct 18, 2020


these units are usually set up to have the beater rotate in a clockwise direction facing front. If they get stuck, it is usually due to excessive wear or the hexed end has been lubed and has created a suction seal in it's counter part. Try rotating the beater in a counter clockwise direction while holding the drive wheel pulley stationary. Be sure to unplug unit first. this has worked for me in the past but can be very difficult at times.

Freezers | Answered on Oct 09, 2020


Too high of water pressure letting in more water then it can drain off. Try turning down the water first

Freezers | Answered on Sep 28, 2020


either a t-stat issue or if it does not run for more than a few seconds, your compressor is done for.

Freezers | Answered on Sep 15, 2020


I Need two panels replaced on my Walkin Cooler, is there anyone that cacn give me a quote/price for this repair

Freezers | Answered on Sep 13, 2020


Could anybody please tell me what the colored bottons for this freezer mean. I just got one second hand, plugged it in and there is a red light on. There is also a botton with an S and a circle with a line. I'm guessing that might be on botton but I don't know for sure. It hanks to anyone willing to help!! :)

Freezers | Answered on Sep 09, 2020


Could you comment below with more detailed photos of the back of the orange switch and any other bits with it. If the switch isn't broken It might just 'click' back in. I don't know without better images.

Freezers | Answered on Aug 25, 2020


There are video's on google that have trouble shooting for Igloo ice maker types and for the Igloo ice company and YouTube.

Freezers | Answered on Aug 05, 2020

Not finding what you are looking for?
AEG Logo

82 questions posted

Ask a Question

Usually answered in minutes!

Top AEG Freezers Experts

Dennis Boxerman

Level 3 Expert

1305 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an AEG Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...