Admiral Answered Questions & Fixed Issues

This is a gas dryer so any repairs need to be done by a certified gas technician. The only thing you can do it relight the pilot if it has one. Some have a spark igniter on-demand. https://www.searspartsdirect.com/model/5gl9i1igxy-001810/admiral-agd4475tq1-dryer-parts ..

The control knob and timer is powered by a small synchronous electric motor and driven via plastic cogs, they wear out with so many uses and working in a hot atmosphere. https://www.google.com/search?q=Admiral+dryer+and+the+control+knob+doesn%27t+advance ..

The F3E2 Error Code indicates that there may be an issue with the Temperature Control sensor. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 minute, and then plugging it back in.Another issue is a blockage in the outlet drain pipe or pump.

The low humming sound is indicative that the start / run capacitor has failed. It give the motor an electrical jolt to get it going. Call for service and tell them the story.

you can go to any appliances parts store and get an in line filter it in stalls in the incoming water line before it screws on the water valves comes with instructions if you get the kit

I have an admiral HMG19149 refrgerator with an ice maker. my problem is that the ice tast horable and cant be used. I looked for a filter to change but can't find it. Please help

Either the motor or the pump has failed.

Your washing machine top lord or front lord?
If your washing machine top load you have cleared drain valves in have blocked then check drain motor like that as you can check which model or type

To verify if its the valve or the ice maker the easiest way would be to unplug the machine and then turn the water on. If the water stops, then the ice maker is bad and is continuously applying power to the valve causing the flood problem and should be changed. If the water keeps on coming out then the valve is bad and stuck open and should be changed. If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Hi, please power cycle your washer (ie restart via power outlet unplug and re-plug). After this, please rotate the dial 90 degrees counter-clockwise before attempting another wash . All of these actions to help reset/undo any issues with the washer. Otherwise, you might need to schedule a home diagnosis/repair. Thank you.

Hi, Please double check that you're accounting for the weight of the clothes in the washer. Lighter clothes should produce a lower sound and heavier loads should be much louder. If possible, you can add some oil around the rotating portion of the machine in order to lower friction. Thank you.

possible bad defrost timer or fan

if when shuts down see if voltage to motor if yes bad motor

it needs service go to yp.com find dryer service near you and do it.

inside of the handle were u pull your hand insert a credit card on top and bottom this well release the clip pull down on handle it well come off then titan the 4 hex screws put handle back on this worked on my fridge no need to buy card credit card works we all have them lol

The clutch dogs don't have time to engage.

If you are facing a Canon Printer 4102 erroror unable to solve this issue, don;t worry we are here to help you to fix this issue. The issue occurs because of any paper size issues or some programming issue. With our technical methods you can fix the Canon Printer Support Code 4102 error. For more details contact us today

possible bad control