Acura Logo

Acura Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 267 Products
  • 13K Answers

I am unfamiliar with the model but I expect it will be similar to many cars with electrical connection for the fuel gauge sensor and the fuel pump and flow and return fuel lines.

By 1996 fuel line connections made with short lengths of fuel hose secured with hose clips were being replaced by push on/quick release connectors sealing with an internal O ring. If the fuel lines are steel there will still be short lengths of hose used but if the fuel lines are nylon the quick release unions are fitted directly into them.

Some quick release connectors are difficult to disconnect without either the special pliers or more hands than there is access for.
Cleanliness is important before disconnecting and absolute cleanliness before reconnecting is essential with a spray of silicone or similar on the spigot before pushing the connector fully home until it clicks into place.

Acura Cars &... | Answered on Aug 03, 2020

You have a problem with the vehicle stability control system. Have the trouble codes read and post the codes here and we can tell you what to do next.

Acura Cars &... | Answered on Jul 17, 2020

Look for the code on the outer left side of the glove box, top number is the code, the bottom number is the serial. Just saved you some time and money. Now if you could explain how to get the radio to prompt code entry instead of error. Tried removing fuse under the hood and disconnecting the battery terminal to prompt code entry, to no avail.

2004 Acura TL | Answered on Jul 14, 2020

DTC P1750: Mechanical Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid Valve Assemblies A and B, or Problem in Hydraulic Control System

• Record all freeze data and review General Troubleshooting Information before you troubleshoot.
• Keep these replacement solenoid valves on hand:
• A/T clutch pressure control solenoid valves A and B
1. Check whether the OBD II scan tool indicates another code. Does the OBD II scan tool indicate another code? YES - Perform the troubleshooting flowchart for the indicated code(s). Recheck for code P1750 after troubleshooting. NO - Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid valves A and B.
4. Reset the PCM memory with the PGM Tester or by removing the BACK UP fuse in the passenger's underdash fuse/relay box for more than 10 seconds .
5. Drive the vehicle for several minutes in 1st, 2nd, 3rd, 4th, and 5th gears in the position.
6. Recheck for code P1750. Does the OBD II scan tool indicate code P1750? YES - Replace the transmission. NO - The problem has been corrected

Acura TL Cars &... | Answered on Jul 09, 2020

I can answer generally for all luxury cars that have gotten old, whether they be Mercedes Benz, BMW, Cadillac, Lincoln, Acura, Infiniti, etc.
They all reach a point that they become too expensive to repair. Repairing an old luxury car is as expensive as repairing a new luxury car. As a basic example, many years ago my parents owned a Cadillac Cimarron, the cheapest Cadillac made at that time. One day, the alternator went out on it. A typical rebuilt alternator at that time cost around $65, but for that car the rebuilt alternator cost $400. The manufacturers (both cars and parts) figure that if you can afford to purchase the car, you can afford the premium repair bills. The size of the repair bills doesn't go down as the car gets older.
An owner who is trying to unload an old luxury car at a rock bottom price is looking for a sucker who doesn't realize this yet to take the money pit off his hands at a price that is higher than an automotive salvage yard will pay for it.

Acura Cars &... | Answered on Jun 02, 2020

Now a days Competitive exam has restricted number of attempts in almost exams , one of them is NEET where You have only three chances-one...

Acura Cars &... | Answered on Apr 02, 2020

need a meter to check the circuit rear monitors use reverse switch or light circuit to activate camera --possible short or a back feed from harness

Acura Cars &... | Answered on Apr 01, 2020

By 2005 nearly all cars were fully computerised and switching duties carried out by computer commands and black boxes - it doesn't need much to interfere with or upset with the correct operation of the computerised system.

You failed to mention how or to what you are connecting the rear dvd monitor but obviously it is interfering with the car's computer system.

Acura Cars &... | Answered on Mar 29, 2020

Honda/Acura Navigation Reset
  1. Hold down the Menu+Map/Guide+Cancel buttons for about 5 seconds (the "Select Diagnosis Items" screen will appear).
  2. Hold down the Map/Guide button for 5-10 seconds (A screen with a "Complete" button, will appear).
  3. Touch "Complete," and then the "Return" button (the system may re-boot).
More items...

How to Downgrade/Reset Honda Acura Navigation System

Acura Cars &... | Answered on Mar 28, 2020

How do you open trunk of an Acura max 2005

2005 Acura MDX | Answered on Mar 08, 2020

alarm keeps going off - Acura Forum : Acura Forums > ... > CL > 1st Gen CL

Jun 6, 2011 - 8 posts - ‎4 authors
Now the alarm is suddenly going off when I put the fuse back in. ... I am going to print it and keep it with my stuff in my Acura folder. ... as i connect the battery terminals and wont turn off with the remote. can you help me on this one please? ... Join Date: Sep 2012. Posts: 2. Car 1: 1998 Acura 2.3 Cl. alarm ...

1999 TL Deactivate Alarm/pull the fuse - AcuraZine Community
Oct 4, 2009 - Is there a way that I can deactivate the alarm on my car. ... It is very annoying, especially when it goes off for no reason in the .... My 2001 CL black box has 4 relays, 2 grey, 2 black.removing any and ... Troubleshooting Fail: Stuck Drivers Window, xsilverhawkx, Problems & Fixes, 5, 09-28-2015 07:51 PM. 2005 TL, HFL Malfunction and Parasitic Draw
May 7, 2012
2012 TL Remote Starter
Jul 15, 2011
99 acura tl stuck in park and brake lights won't work
Aug 25, 2010
1999 Acura 3.2TL shuts down on its own
Jul 20, 2009
More results from

1998 Acura CL | Answered on Feb 28, 2020

under brake master cylinder

1996 Acura TL... | Answered on Feb 28, 2020


Acura Cars &... | Answered on Feb 09, 2020


Acura Cars &... | Answered on Feb 08, 2020

I would check for worn motor mounts and CV joints on the front axles. These would be the most likely culprits.

Acura Cars &... | Answered on Jan 15, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

423 Questions

1999 Acura TL
1999 Acura TL

414 Questions

1997 Acura CL
1997 Acura CL

418 Questions

1991 Acura Legend
1991 Acura Legend

284 Questions

Top Acura Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14846 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides