Acoustic Solutions Answered Questions & Fixed Issues

Check that all wires are making good connections. Unplug them all and then replug them. Worst case scenario, could be a bad output transistor or other internal electronic component.

Your Bluetooth device might respond to 0000 if no code has been supplied either on a sticker on the speaker or in the documentation that came with the speaker.

It will not be as loud and you will have to turn up the volume.

That sounds like you have the speakers wired to the positives only.

BUY A MIDI LEAD,,,,,,,,,,,, FROM YOUR LABTOP TO YOUR KEYBOARD,,,,

You can't access it simply because it doesn't exist - your tv has only one HDMI jack.
Your only option is to use a HDMI switch, one like
http://www.amazon.com/HM-501-5-PORT-HDMI-control-cable/dp/B000FHQMFK

check the settings and find out if your tv and dvd player are set to the right frequency eg: 50hz, 60hz

You obviously don't actually read what people write - I don't have a sub-woofer problem! Not much good trying to sell me help then is there?

hotpoint first edition hvl211 has 3 flashing lights how do u stop this is there a reset you can do

Found it thanks !!

acoustc solution ds 1033 instruction manual

similar problem but with hum bar on picture , suspect capacitor in power supply ,cannot get circuit diagram

how many cables shud link up to the tv with the acoustic solution model AS134?i have the colour coded pins plugged in to the speakers left,right,back left,back right and center which plug in to the subwoofer box.how ever i then only have 1 cable left which has a red pin and a white pin that i assume go into the AUX left and right pin ports?the cable then splits into another 2 red and white pins.do these pins plug into the left and right output on the tv?am i missing any cables?help would be appreciated.

Human voice is made up of many components of different frequencies (Ranging from 200 Hz to 8K Hz), so if u want to raise the main body of vocal, increase frequencies of 200 to 400 Hz & lower the rest. For clarity go beyond 3K Hz & raise them. These are just initial steps.
Remember, every human voice is different so its components. you can find the best setting by listening yourself & by changing the setting on above guidelines...
All the best

i have a written copy that came with my ds 1233 so i could scan it and convert the images to a pdf file that i could email to you.