Acer Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support

problem with hard disk drive laptop not detecting any hard drive. open back cover remove hard drive and put it again. otherwise change the hard disk reinstall os and drivers.

I found a solution that worked for me: 1. Turn on the projector2. Press "Power > Left > Left > MENU" (Opens the system menu)3. Choose "RD Menu"4. Choose " EEPROM Restore" (the projector turn off and the power lamp blink red for about 1 minut. Then it stops)5. Turn on the projector again and it should word again

Hi, this is Err in Acer's video projector. Thank you from the factory fan rpm deta please enter factory mode

Try unplugging it for 5 minutes, if that fails to reset it the scanner has failed.

Some pointers:

• The tools you need (makecert, Inf2cat, signtool) can be found in the Windows SDK and the Windows Driver Kit. You don't need to install everything! Just check the "Tools" in both the web installers will do.
  • If you cannot download the SDKs due to filesize (~2.2GB), I zipped the 3 tools and you can download them here. But please download from Microsoft whenever possible.
• When making your own cert using makecert, add the -pe parameter so that you can export the private key of the certificate later (useful for installing your own signed drivers again on a different PC in the future! To export, simply right-click your certificate in the MMC snap-in)
• You need to use the newer INF in the Pastebin as the old one will not sign or validate correctly.

To scan in Windows 8 after driver installation, simply go to Devices and Printers, right-click your scanner and click Start Scan. You can also use the Metro 'Scan' app, although previewing scans return a very blurry image.

Check this out!
http://www.benq.nl/support/downloads/downloads.cfm?product=27
Hope this Helped! x404x

Check your manual to see if there is a bulb/lamp 'reset' procedure.

suggest looking in file manager at cd directories and see if any are labelled as driver - windows xp see if any have an INI file type Try also adding a device in control panel - devices. Then when it comes to driver part - select have disk and then point the have disk to the cd rom drive and you may have topoint it to the directory as well. It should find a (whatever file name).INI . type file .