Acer N - Answered Questions & Fixed Issues

http://batteryuniversity.com/learn/

Maximum battery issue and sometimes overheating may cause the same.

you may need to go into your control panel settings and look for display setting and set it up from there.

Hi, I think is software issue get someone to re-install the operating system of your ACER and it should work well again

There are drivers and utilities available to enhance operation of the system after upgrading to Windows XP. The following driver updates are available for this series: Flash BIOS (Note: This should be installed PRIOR to upgrading.) Touchpad Drivers The following utility updates are available for this series: Launch Manager Notebook Manager PowerKey Volume Control Please note: Drivers not listed on this page do not have updates. The operating system should install or detect existing drivers which will work with the new operating system.

My PDA n30 is not a year old yet - when I put it to sync and charge everything looks fine but when I unplug it does not stay charged - it blacks out straightaway.

Please help

you may contact the service provider.......

Hi,
Unfortunately, you will need to do a HARD_RESET. A hard reset will erase all records and entries stored in your handheld. Never perform a hard reset unless s soft reset does not correct your problem.

SOFT RESET = USING THE TIP OF YOUR STYLUS LIGHTLY PRESS THE RESET BUTTON INSIDE THE HOLE ON THE BOTTOM OF YOUR HANHELD.
HARD RESET = WHILE HOLDING THE "TODAY" AND "MESSAGING" BUTTONS (a) USING THE TIP OF YOUR STYLUS LIGHTLY PRESS THE RESET BUTTON INSIDE THE HOLE ON THE BOTTOM OF YOUR HANDHELD.

I HOPE THIS HELPS.
Graham.

This happens when you get new one or after reset. It wants from you, to touch 5 points on the screen to calibrate touch screen.
Start acer without connecting usb cable and calibrate it first.

actually if there is no personal data then reset it through a pin hole reset button given........

To get the Unlock code for the Mobile Phone Please Contact the Service Provider....

Maybe, It doesn't work because the driver you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer first, then choose "troubleshoot compatiblity". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141

It looks like only a HARD reset will do the job according to the manual.

here is the link to the manual.

http://www.kolyasoft.com/pocketpc/Acer_n10_pda_manual.pdf

Good luck and don't forget to vote.

i use nokia for internet ,,you can find the domain details here http://www.ip-details.com/ ,i got the ip details at free of cost ,it is useful to you

As far as I know, some N300 series PDAs have a built-in Wi-Fi card. If this is your case, gather your Wi-Fi router's (or the one you want to connect your PDA to) SSID and encryption informations, go to 'Start > Settings > Connections tab > Wi-Fi' and tap 'Search for Networks'. After a while, the available WLAN should appear on screen. Select yours, fill in the required informations, and, after a while it should get connected. Otherwise (i.e., if your PDA is not Wi-Fi enabled), you will still be able to connect to the internet whenever it is connected to your PC (which should be on-line, of course).
Anyway, if you happens to miss your device's user guide, feel free to download it from this location.
Just my 2 cents...
Regards, Carlos

I'm afraid you'll have to hard reset your device. Be warned that your device will return to its factory defaults, and you'll loose everything you have installed, as well as your personal data, but I can't see any other way to solve your current problem. To perform a hard reset, press and hold both the Today and Messaging buttons (at both sides of the D-pad), and, at the same time, briefly press the reset pin (on the botton of the device) with the stylus pen.
Hope it works for you.
Cheers! Carlos

You can download the n30's manual from this direct link. If it doesn't work for you, please, let me know. I'll try my best to download it and upload it to some other file server for you.
Cheers! Carlos

Click on Start > Settings > System > Regional Settings > Region & change the desired language.. Restart device when done..

It works if you get your network as open (without protection WEP,WPA,etc.)

Regards.