3Com SuperStack - Recent Questions, Troubleshooting & Support - Page 7
Lan card disabled
When u plug the ethernet CAT cable in the LAN card socket , so you see any light orange or green flashing on the LAN card itself.
If yes then right click on my computer >> properties >> Hardware >> device manager>> check in network adapters whether the LAN card is enabled or not
If NO the right click on it and enable it check whether it is able to receive any ip address
If u see no light at all
Then you might have to install a new LAN card on the system
Access Point AP2750 Problem
i would try updating the firmware on your router and access point. I had the same problem and did this to both and they are now working fine. Let me know how it goes.
Driver download
Routers do not require drivers to be installed in a computer. The only driver necessary to communicate with a router is whatever driver you need for the networking card (wired or wireless) contained in the computer. The rest is done via standard networking protcols.
2/24/2016 12:00:17 PM •
3Com...
•
Answered
on Feb 24, 2016
PEOPLE CANNOT DIAL AN EXTENSION
The extension range needs to be allowed in the Auto Attendant. For example, if most all of your extensions are in the 100 series range and you are trying to get to a 200 series extension then you have to have the option in the Auto Attendant (under Menu tree) for button 2 that says "Reserved in Dial plan".
If the extension is in the correct range then you should check to be sure that the extension is Dial Plan, Tables, Internal 3 Digit extensions (click devices using for older software). Make sure that extension is in the list (on the left for older software).
Supply problem
If you could state your problem cleary, you might get a better answer.
What can't your switch do?
Does it power on? Switched come with a power adapter that plugs directly into the wall power, then other end into the back of the switch. If it doesn't come on, suspect internal problems
I cant save 3com router configuration
Hi,Try using internet explorer to change the settings, I was using chrome and it wouldn't commit any changes, but it worked with IE.
3/17/2015 7:11:59 PM •
3Com...
•
Answered
on Mar 17, 2015
Not finding what you are looking for?