Questions & Answers for: Honda CRF 250 R zx9 fork oil

Question about 2005 CRF 250 R

3 Answers

Oil Change to Honda CRF250r 2004 I have drained out old oil, on Right hand side of motor is filler cap, which shows to fill with 770ml of oil. which i have done. On the left hand side, is the dip ...

Ad

How much tranny oil do you put in 2005 CRF250R after oil change? How much tranny oil do you put in a 2005 Honda CRF250R after an oil change? Theres no markings on the tranny dipstick...? You'lll need ...

Ad

i dropped my bike of the stand and now the handelbars are not in line with the wheel how can i fix it cheers Typically you would loosen the triple clamps that hold the fork tubes, trap the front wheel

...to know how to replace seals and add new oil. How much fork oil? need to replace front fork oil seal change the oil seals and oil in the fork,and avoid wheelies on the bike and off road

Question about 2005 CRF 250 R

1 Answer

...oil goes in front forks there is the inside fork damper that should contains around 195-200 ml but you d'ont have to open it when you only service fork seals.....but to be honest you better do it ...

...fork oil or top it up do this once the fork leg is back in the bike,repeat the whole procedure for the other fork leg,once you have done the fork seals reinslall the fork legs back into the bike and ...

ok my crf150f the shifter wont shift after i get into 3rd gear unless i just tap the shifter a little bit then i got to do it again to get into 5th gear i need help fast please a diagram would help ...

how many seals are in the front forks of a honda c... How many seals are in the front forks of a honda crf250r there is one seal per side and also one dust seal per side to keep dust from getting to ...

why is there gear oil in the crank case of my 2001 honda cr 80 Some one tried to get rid of the whinning noise it should have a lite wait oil in itJohnny To be sure that you won't have clutch slip ...

2008 Honda CRF 250 R won't shift into 4th gear I removed my clutch basket, looks like my shifter gets stuck or "locked". what could be the problem. I probably have to split the casing and check the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...