...repair to the unit, I checked through the manual and couldnt find anything of interest http://www.zoom.co.jp/archive/English_Manual/E_G92tt.pdf that might help you but doubt it. Samson Technologies ...
card? If these do not work then it is probably time for a repair, but I'd ask the Zoom Corp or your dealer first. They may have heard of similar problems and know a painless fix. www.zoom.co.jp (Japan
Zoom H4 And now it wont work on battery power it will only work with the power adaptor or usb where can i send it to get repaired? Ask your dealer, the one you bought it from. They may suggest an easy
H4 only runs on 120 volt. Is there a fuse or something that can be replaced or is it completely ruined? I had one of these and I did the same thing by accident and I took it to a repair place and they
H4n handy recorder Help one of the microphones has snapped, where can i get this repaired it is still under warranty. I am based in London Your warranty most likely does not cover incidental damage. ...
Question about H4 Handy Recorder
Zoom H4n compact card is stuck in the slot. Cannot remove it. Where do I send these to be repaired I had the same problem. the sd card got stuck somehow with the secure lock. the spring still pushed ...
...They may be able to provide additional troubleshooting steps or repair options. It's important to note that if the recorder is still under warranty, you should contact Zoom for repair or
Question about H4 Handy Recorder
when i power my zoom on it powers up but immediatly says goodbye This issue could indicate a problem with the firmware on the Zoom device. Here are a few things you can try to resolve the problem: ...
Question about H4 Handy Recorder
...Zoom H4 powers up and screen lights but no lettering is seen If the green screen on your Zoom H4 recorder is not displaying any lettering, it could be due to a few different issues. Here are some ...
Question about H4 Handy Recorder
...Zoom H4 service manual or circuit diagram? The unit doesn't turn on, so I want to repair it. When connect the battery connectors to lab psu, it draws 0,3 A at 1,4 V when turned on, and 0 A at 3V when ...
Usually answered in minutes!
297 Questions
191 Questions
155 Questions
161 Questions
136 Questions