Question about Z46Z83D 46" Rear Projection Television
...Zenith (LG) to see who they recommend. replace convergence ic's and 1ohm resistors near ic's check all solder connections on convergence board also check 110k ohm resistor in front of H.O.T on main ...
zenith r56w36 I accidently pressed the auto convergence button and now my picture is bowed and is in 3D and looks very bad. I tried to set the convergence by pressing the only auto convergence button ...
Question about R49W36 49" Rear Projection HDTV
...Zenith Projo models examp.(Z46Z83D8) & (A50M91W9), all with the same convergence 9-1690 convergence board. My manual has been missing for a year and I need the service code to enter convergence ...
Question about R49W36 49" Rear Projection HDTV
...The zenith part number for the convergence out PWB is 6870VS1531A thats a small skinny, is that the board he took or did he take the large board on the left side of the chassis looking in the
zenith rear projection a50m84w The green and blue coloer lines in the convergence are curved. The convergence app works but will not line up what can I do to fix it. you need to change your ...
Question about R60V26 60" Rear Projection Television
...Zenith R60v26 with a convergence problem. so I replaced the IC's and now the problem isn't as bad. the red and green seem to have fixed, but the blue is still out of wack. After revisiting the ...
Question about R57W46 57" Rear Projection Television
...zenith tv is showing 2 or 3 colors lines on bottom left across tv you need to replace the convergence amplifiers if you know how to solder or replace the complete convergence board a lot easier to do ...
Question about A60M91W 60" Rear Projection Television
...zenith rear projection screen.the left half of the screen is fine.the whole right hand side has a green tint and has double vision. Bad convergence causes this replace STKs or whole convergence Board ...
...zenith projection TV fixed so i thought i had replaced convergence STK chips and resistors on the convergence board and still have double images red blue green(wont line up), even after auto ...
...convergence ICs that need to be replaced.You can exchange this board for new board at Zenith exchange moduels 1-800-632-6637 But if you have the RCA Chassis then you will have 2 bottom boards one on ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions