Question about TLP 2844-Z Thermal Label Printer
Zebra TLP 2844-Z Thermal Label length problem HI freind tell me how to set page height dynamic mean if my data is 4 line automatically it set height of page for 4 Line. and if i have 10 lines data ...
Question about TLP 2844-Z Thermal Label Printer
Zebra TLP 2844-Z Test page print within Win XP Good afternoon, I've purchased a Zebra TLP 2844-Z, set it up & installed all drivers. Next per instructions I configured the device to print on the label
Question about TLP 2844-Z Thermal Label Printer
Zebra TLP 2844-Z on serial port I'm trying to set up a Zebra TLP 2844-z on a serial port. When connected through LPT1 it works fine. I removed it and tried to connect it using a serial port (NOT usb).
Zebra TLP 2844, which is now only printing on the left tag (Part No. 8001270101, side by side tags of 1.13 x 1.25). I cannot configure it properly to print side by side as well as not skip tags. check
Question about TLP 2844-Z Thermal Label Printer
...very poor quality i have TLP 2844 bar code printer, its printing very poor quality print outs even after changed the drivers, Download zebra setup utility and use it to configure print
Question about TLP 2844-Z Thermal Label Printer
...page for zebra lp 2844-z With the printer off, press and hold the FEED key while you turn the printer on. When the LED flashes once, let go and a Config label will print. Hope that helps
Zebra TLP 2844-Z appears to print from the iSeries/AS400 but nothing prints no error message Set up same as other Zebra printers that are working printing bar codes check the connection configuration
...zebra plt2844 on netware or do you know the default ip adress go to the driver and print the configuration label, if you see the ip adress, just write the IP adress on the browser and you be abel to ...
...Zebra 2844 CTP printer: Recently changed from 2x1 hard labels to 2.25x1.25 sticky labels, and now my printer will not print my category on the label, and I get an additional blank label printed, then ...
TLP 2844)is able to do it. Thank you. Yes you can use this printer in thermal transfer mode (uses a ribbon) or direct thermal mode (uses special paper). Look in the manual to see how to configure. The
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions