Questions & Answers for: zanussi washing machine repair noisy

zanussi washer/dryer very noisy on spin, seems to be struggling to turn drum with a kind of grinding noise. Hi, Sorry but this sounds very much like the drums bearings have failed. It's quite a big ...

...washing machines due to water getting into them if the drum bearing seal fails. (Hotpoint and Zanussi in particular in my experience) To check for drum bearing failure you can take the belt off and ...

...zanussi aquacycle 1100 is making a very heavy clonking noise on spin cycle.Have you any suggestions? Thanks Craig Sounds like the main drum bearings have gone. Turn the drum by hand and if it feels ...

...Zanussi Aquacycle 1250 washing mc. First noticed the mc getting very noisy during cycle,& now after the spin cycle the clothes are still dripping wet. Regards Pauline Sounds like the drum bearings ...

...noisy on fast spin Hi The most common cause of this is the main drum bearing seal has failed and water has washed all the grease out of the drum bearing and knackered it. You will hear a loud roaring ...

...Zanussi ZJD1219 Washer/Dryer - making a terrible noise when on spin cycle and clothes coming out with dirty spots on them......have tried putting on 95 wash cycle with no soap and also same again ...

machine has gone very loud when spinning,washes perfect,any advice Sounds like the main drum bearings have failed. Spin the drum by hand from the front of the washer, if it feels rough, or is noisy or

...washing has lots of black dirty marks on them The machine has been very noisy this las t few weeks, still spinning and washing ok. The washing completed this weekend has a greyness on the clothes and ...

Makes a very loud noise when spinning Sounds like the main bearings have failed, spin the drum by hand, and if it feels rough or is noisy, then the bearings have failed, a major repair!!!!

...machine has been making a noise while spinning and now seems the dum wont go ound? Sounds like the main drum bearings have siezed up. If it was noisy before stopping and the noise has been getting ...