Questions & Answers for: zanussi washing machine faults e10

Question about FJD1466W Front Load Washer

1 Answer

washing (Machine tries to fill for 10 min without reaching the level) Checks to do: Is there one of the tree valves that is not working? NO, Verify that tap and hoses are letting the water coming in.

Ad

Question about IZ161S Front Load Washer

1 Answer

Zanussi IZ161S Water filling problem Last week the Emergency Emptying Hose became disconnected from the machine. I only noticed as the water washed around my feet. I diconnected the machine and laid ...

Ad

Question about WJS1265W Front Load Washer/Dryer

1 Answer

E10 error --- 'The Water tap is not turned on.' It is a valve fault.It is not taking the water in possibly. It is the green side of the triple valve. Try manual clearing the valve.Else The water inlet

Question about GLTF2940E Front Load Washer

1 Answer

...washing gives an E10 error messge. Frigidaire, Zanussi, AEG, & More.... EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine. 1. there is a blockage in the ...

Question about WJS1265W Front Load Washer/Dryer

4 Answers

...Zanussi W/D. The machine would wash but not dry. Changed the water inlet valve assembly. All working again. All credit to wildwest1959, thanks. check to see if the water inlet is blocked. the link ...

Question about ZWF1430W Front Load Washer

1 Answer

...Zanussi Jetstream washing machine gets half way through its cycle and then decides to stop, displaying the Error 10 message. As we seem to have mislaid the instruction book, we would be very grateful ...

Question about ZWF10070W Front Load Washer

1 Answer

machine stops. I have checked and cleaned the filter but it is still doing it. Help! Hello, Count the number of green flashes(1st number of error code). count number of red flashes(2nd number of error

Question about IZ161S Front Load Washer

2 Answers

...Zanussi 1600 Jet System Washing Machine, it has started the cycle and 4 mins into it, an E10 error reads on the display, have turned the machine off, and back on, checked pipes, can see you physical ...

...restore power and it continues to flash "E10" I would recommend having a professional out to properly diagnosis your washer. Hopefully this information is helpful. -Matt It's a zanussi washing ...

Honda eu 6500 throwing code e10 and e20 when I start it what dose it mean Error codes are standard to many machines. This video explains the codes. Zanussi Washing Machine Error or Fault Codes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...