Questions & Answers for: Harley Davidson yellow wire

yellow wire which if I'm correct is the low beam and the white is the high which Is working. When I hit the toggle for the passing lamps no luck. I tried it with just one yellow and no diffrence. I am

positive when the horn button is depressed and the black is ground. The wiring for the horn button is orange/white positive and yellow/black to horn. The orange/white wire gets 12vdc from the acc fuse

...The other wire from the passing lamp switch is Yellow and is spliced in to the Yellow wire that goes to the headlamp bulb. This is not a diagram, but it is pretty simple layout. Hope this

connector is numbers 1-6 in what order do the wires go Isn't it fail safe? I mean yellow group red wire will only go in lets say 3 if you try any other # it won't go.Just a thought,have you tried that

...came with the new unit is different. The old one has 3 wires coming from the housing/lamp. (white, yellow, black). The new one has 5 wires. One yellow, one white, 2 black, and one yellow with a male ...

...yellow wire need to know which one is high beam The Factory manual I have list's three wires going to head light Black/ground Yellow and white It doesn't list which is high or low beam. Hi ...

...diagram On a 2011 Road King Classic coil, there are four wires comming from the coil. Yellow/g, yellow/b, blue/o and a gray with a blue stripe. what does each wire do? HARLEY DAVIDSON Tmanuals ...

...wire and one yellow wire. Does the red wire or the yellow wire replace the red wire with the yellow stripe on the original? Hi Anonymous, Black=Ground Red=Brake light Yellow=Tail light Have nice

IM LOOKING TO INSTALL A TACH ON A HARLEY SPORTSTER 1980 3 WIRES BLACK GREEN AND YELLOW IM TRYING TO INSTALL A TACHOMETER ON A 1980 SPORTSTER 3 WIRES GREEN,BLACK AND YELLOW,MIM LOOKING FOR SCHEMATIC ...

...wire. I have 3 wires yellow, and black, and orange. I need to know where they hook on gauge. Shown here. Power is the orange. Ground is black. Signal is Yellow. ...