Questions & Answers for: Foxconn yellow wire

...and failed. Cable modum hard wired to fast ethernet port. Went to divice manager and there is a yellow box with an ! point in it over the sis900 fast ethernet line. Tried to up date drivers with ...

yellow wire snapped, how can open this cooler to fix this? You can solder the two open ends of the wires/base together. Generally, it doesn't hurt at all to have the yellow wire not connected. As long

...wire to its proper position disconnect all power cables, plug in the large connector along with the extra 4 pin adapter to fill the slot, the 4 pin part should be orange, yellow, red and black. Next ...

...Yellow wire is 12 Volts. The two Black wires are Ground wires. 4-pin standard Peripheral power cable unplugged, the Positive probe lead is inserted into the Front of the connector to the Red wire. ...

...wire (green, yellow, red, orange, blue) and another wire that is either black or white.  When this is the case, usually the colored wire is positive (signal) and the black or white wire is ...

...Yellow wire. Testing for 12 Volts.[All the 3.3 Volt wires (Orange) end in the same central locating point, inside the Power Supply.Crudely explained that central point, or tap, is the 3.3 Volt power ...

...wire between green and black and voltage must be: yellow 12V, red/purple/gray 5V, orange 3.3V. If your PSU give under voltage (more than -10%):Buy a new one and test your motherboard(mb) with it (in ...

...Yellow wire - paperclip. Negative (Black) probe lead of multimeter touches Black wire paperclip. Worried about shock? Naa. The dangerous voltage is contained in the case of the Power Supply. 100 to ...

...jumpers and all connectors voltages are ok, yellow led on mb stay allways on but it doesn't start up until i shortcut the green wire of source i don't know what to do more need number of board ...