Questions & Answers for: Maytag yellow frame

...yellow/orange red/white, and blue/black and between the wires and the frame. I pulled the motor and it all looked very good. Can you help? I think that you have a faulty motor. Are there any visible ...

...now pull the entire panel off of the frame for cleaning. Rebuild in the reverse order (and don't forget to re-connect that yellow wire!) There ya go! Please don't forget to rate this as "FixYa", OK ...

...the ground to the frame. Yours probably does NOT have a ground strap, though... yours uses that Green/Yellow wire for frame ground. All of that to say this. Don't lose sleep over it. Ya done good. ...

...and black wire go to L1 and L2,the white goes to the n terminal or neutral and the green or green/yellow is the safety ground to the units metal ...

...yellow and white on white..but green? The red and the black are interchangeable, they are your hot wires, but the white must go on the white that is your neutral wire. Let me explain the green wire. ...

...yellow wire. Also on the center post is a metal strap. All of the instructions I've read say that this strap is normally copper, but mine looks like stainless steel. Is this the right strap that I'm ...

yellow or red but driver). Then you can tip the front forward. You will find the next frame below the holds the drum in place. You can do some testing with out removing it. Check the element first, it

yellow stripe is used as European Standard wire colour for earth (i.e. ground / chassis) so it probably joins to a part of the body (control head body to dryer frame?). The connector on the end of the