Question about HTR-6130 Receiver
receiver to Yamaha HTR-640 optical input (DTV/CB). Optical cable from PS3 output to Yamaha 640 optical input (CD). Surround sound from DTV works fine, but no sound when I play a blu-ray DVD on the PS3
...yamaha rx-v663 to decode DolbyTrueHD audio of get my SBL/SBR speakers to work without turning the bi-amp on. You should always connect with HDMI when using and decoding HD sound formats. If you use ...
...Yamaha RX-V663 receiver and I am having some issues with sound when watching blu-rays and hd-dvds. No matter what sound format the disc is in, it is only playing back under PCM on the receiver. It ...
...yamaha HTR 6130 receiver using hdmi and an optical wire. In the Bluray setup, DTS in on. but for some reason The receiver only shows PCM or DOLBY, is DTS supposed to illuminate? if so, how can I get ...
Question about Rx-v465/rxv465 Home Theater Receiver
...Yamaha RX-V465.When I play a blueray disc the signal info shows PCM.Shouldn't it show Dolby Digital or True HD? Your PS3 probably has a setting for what digital bitstream it produces. Check it out. ...
Question about Rx-v465/rxv465 Home Theater Receiver
...Yamaha cannot decode audio in AAC or other computer formats, so be sure to change the audio settings of your player to output PCM and not raw/bitstream. Some times HDMI control ON setup (On Receiver) ...
...watch the satellite. Now when I press HDMI2 on the Yamaha remote I get nothing. No sound, no picture and the receiver now shows PCM. How do I switch this back? What am I missing? try different ...
...Yamaha is not getting a PCM (digital surround sound) audio stream. This happens when I turn off the cable box. It also happens when I plug the HDMI output to a projector or monitor that is not HDCP ...
...Yamaha RX-V667 Receiver is only passing through PCM audio - can I do some sort of factory/firmware reset? Firmware is 2.05. Not sure if this will help, but is the US ...
Question about RX-V595 Receiver
Yamaha RX-V595 Receiver will play Dolby Digital 3/2.1 audio Blu-Ray disc with player set to bitstream but will not play DTS-HD 3/2.1 unless output is set to PCM. Is this an issue with the Yamaha Recei
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
