Questions & Answers for: YZF Thunder ace 1000 R yamaha clutch

Question about 1997 YZF Thunder ace 1000 R

1 Answer

clutch lever has no resistance & seems not to do anything. Engine cuts out when put in gear. (sidestand up!) does it have a cable clutch or hydralic clutchyou need a clutch or slave cyclinder.

Ad

Question about 1997 YZF Thunder ace 1000 R

1 Answer

Yamaha YZF 1000 clutch and/or transmission problem? Just bought my used '97 Ace. When cold, I start up the bike in neutral, pull the clutch in, and downshift into 1st gear (it cleanly shifts into 1st)

Ad

Question about 1997 YZF Thunder ace 1000 R

0 Answer

...on the blue links below. Good luck and have a wonderful day. YZF 1000 Thunderace clutch problems Thunderace Clutch Yamaha YZF1000RJ Service Manual OEM parts for Yamaha YAMAHA YZF1000R Owner ...

Question about 1997 YZF Thunder ace 1000 R

1 Answer

I have a 1997 1000R, I had my back brakes lock up and while trying to get going enough to get to my house a mile away my bike acts like it's in nuetral when it's in gear. You can hear it and feel it ...

Question about 1997 YZF Thunder ace 1000 R

0 Answer

...below. Good luck and have a wonderful day. 8 Top Tips for Brake Bleeding Success clutch is the same Thunderace Clutch Yamaha YZF1000RJ Service Manual OEM parts for Yamaha YAMAHA YZF1000R Owner ...

Question about 1997 YZF Thunder ace 1000 R

0 Answer

...on the blue links below. Good luck and have a wonderful day. YZF 1000 Thunderace clutch problems Thunderace Clutch Yamaha YZF1000RJ Service Manual OEM parts for Yamaha YAMAHA YZF1000R Owner ...

Question about 1997 YZF Thunder ace 1000 R

0 Answer

...Good luck and have a nice day. YZF1000 Thunderace Cam Chain Rattle Yamaha YZF 1000R Thunderace clutch sound dwik sprzga Yamaha YZF1000RJ Service Manual OEM parts for Yamaha YAMAHA YZF1000R Owner ...

i have taken the fuel tank off the bike the bottom of the tank touched the battery terminal and melted some wires i have replaced the wires as far back as they melted . all fuses are in working order ...

clutch rod and seal on gear shaft, do i need to remove engine if not do i need any special tools to remove said seal Hi, Anonymous for this scenario you will need your service/owners manual if you can

...Yamaha YZF 1000R Thunder Ace (it's typically near the battery) and use a multimeter to test for continuity across the two large terminals (the ones that connect to the battery). If there is no ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...