Questions & Answers for: xerox xc830 parts

Copy reprints 1st 3rd of copy on 2nd 3rd of page and so on. Not sure to how to describe this problem. I have shaken toner drum and emptied dump at end. Insptected drum and cleaned mylar strip - or ...

xerox xc830 and removed the broken one. What is the easiest way to install the new gear? Thanks again for your help. 1. remove front cover which is over the paper tray - 2 screws and then unflange and

xerox XC830 table top copier. paper jam where the paper feeds into between the hot roller. When I open up the copier the part that heats up does not seem to be engaged where it needs to be and the ...

...XC830 copier, showing a L-4 error. What is this? L4 is a main motor problem. When you remove the rear cover it is left of center about mid way down the machine. There are 4 screws holding it in, one ...

Xerox XC830 Copier--Paper jams as it is leaving the copier After top portion of document is copied on paper and it is going through the final "roller", it jams. Inside the copier on the rear side ...

...Xerox XC830 copies are dark and have lines but otherwise present the image. How can I make the background white again.? Thanks! Ron You probably needs some servicing. Drum, developer and other parts ...

Xerox XC830, flashing 'P' Same problem here. My is a Xerox XC830, paper does not feed from the paper tray, instead when it tries I get a flashing 'P'. When I manually feed the paper through the slot ...

...xerox xc830 prints bout 1/2 page and then stops and the paper light comes on. The paper is not stuck in the machine it is just laying there. How can I fix this problem? I have looked for someone to ...

xc830 copying dark ,down center of page There are a series of mirrors on the carriage that moves back and forth under the original glass. When dust builds up on these mirrors it makes the copies ...