Question about Phaser 6360 Laser Printer
...price of of this product Xerox phaser 6360 sir, i need to need to know a market projection and price because i do study of this product. 50,000 pages a month and depending on features, $1400 to
...Phaser 6360 that is networked and recently came up with a "laser failure" and error code 07 and error code 11. I went to XEROX support site, but all it said to do was turn it off, wait 30 seconds and ...
...Xerox Phaser 6360 has either garbled characters, inverted or upside down display, or no display, the control panel is most likely bad and must be replaced. Here's a video on how to do it and where to ...
...Xerox Phaser 6360 Laser Printer" on vista http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=6360&ripId=&Xtype=download open the above link.it takes you to the ...
Question about Phaser 6360 Laser Printer
...Xerox Phaser 6360. Have replaced the Transfer Roller, Imaging Unit, and Fuser. It looks like the problem is mainly in Magenta. This is not a repeating defect, but a ghost image. Thanks. I have the ...
...Xerox Phaser 6360 printer? Safe , most likely, recommended? I don't recommend using generic supplies in anything but ink ket printers. By that I mean the liquid inks. The toner is a phaser is pretty ...
xerox phaser 6360 imaging unit stuck I have a 6360 xerox phaser and the imaging unit needs replacing. It is stuck and will not come out. Any suggestions? The lid lifts a lever on the right side of the
Question about Phaser 6360 Laser Printer
...Xerox Phaser 6360 with a ram error what could the problem be? Are you sure it is not a NVRAM error you are recieving?If yes, remove the IMAGING UNIT.Close the door and Power On.Msg gone? If yes, ...
Question about Phaser 6360 Laser Printer
just put in a new imaging unit to a xerox phaser 6360 and now everything is pink... any ideas how to fix? Check which colour you replaced and check that everything is seated correctly. Good Luck.
Xerox phaser 6360 smearing magenta toner only that's the developer assembly that has gone bad. If you're using 3rd party toner it wears down a lot quicker. You'll need to replace the magenta developer
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions