xerox 6110 I am using a mac with OSX panther and I can not figure out how to change the paper thickness there is no manual lever so it must be in preference but I am yet to find it Don't know much ...
...6110 - red light on, not printing Red status light is on, inks are full, no paper jam, front cover and rear covers closed. Tried Xerox telephone customer support - useless , "somneone will call you ...
xerox phaser 6110 which is failing to print. When the green light is on I send a document to print, the printer then sounds as if its going to print but then a red light follows with no print out?????
...Xerox Phaser 6110 is printing perfectly well in colour but when it prints black the ink is faint running in two lines down the left hand side of the paper. It looks like the rollers are removing the ...
xerox 6110 bad print at paper over 80g I'm trying to print from Word. When I go to print I go to 'Properties' of the printer change the 'Paper Options' from 'Plain Paer' to 'Envelope' or else option! ...
paper only feeds 1/2" then stops and red light goes on The paper is not being picked up quick enough. The cause is probably a worn or dirty pick up roller. Try cleaning the pick up roller under the ...
Question about Phaser 6110 All-In-One Laser Printer
...or print quality problems I would leave it alone. Most likely it is just a noisy paper feed assembly. Not uncommon and rarely a problem to be concerned about unless you are having feeding
...Xerox phaser 6110 (a rebadged Samsung) It is due to the pickup roller "tyre" that is the rubber roller that pulls the paper from the tray. It gets shiny and slips on the paper. The cure is to "rough ...
the printer keeps saying there is a paper jam at tray 1 but there is no jam It is not picking up the paper. You need to either clean or replace the feed roller on tray 1
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
