...Thanks in advance for any help. I have a Sterling st-51 condenser mic and purchased a Behringer xenyx 1002b mixer. Similar problem, dynamic mics work in low impedence with or without phantom pwr ...
when using the dsp of the mixer after an hour or more of use the is a hissing and scratching and crackleing sound what could be the cause iof this?...the mixer is brand new and only has been used 3-4 ...
...Xenyx 502 mixer, it's brand-new, and for some reason there's a weird buzzing/hissing sound in the main mix that will just not go away no matter what I do. I've unplugged everything, including the mic ...
have a Behringer 1202 Xenyx FX, balanced cable into a new windows 7 PC and keep getting hiss. When I raise the gain, mic or master volume the hiss is more awful. my internet broadcasts sound awful. ...
Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer
There is a annoying hiss on my Xenyx Q502 USB which does not go away, even when the Microphone is unplugged. Also when Main mix is pressed there is a weird delayed feedback which gets louder and ...
Question about XENYX 2442FX Mixer
Mixer Switch on and after a short period theres a noise that sound like a machinegun and a Hiss sound through the speakers I assume that the power-amp is good. This noise, of course due to defective ...
Question about XENYX 2442FX Mixer
...hissing I'm getting over the mic on a Behringer Xenyx 1204 USB setup? I have a just bought a Behringer Xenyx 1204USB mixer, a couple of Behringer C-1 mics, and 3m Stag XLR cables. I'm plan to use ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions