Questions & Answers for: wont cable box stay 3

cable you should, for sure call the companey, and see if they can explain how they hooked up your sysytem as theres many many ways to do this. If you have the owners manual what im about to explain is

...wont stay on channel 3 I bought a 25" zennith Concierge series tv from a friend. The back says its model is H2533y. Every time I turn on the tv it goes to channel 52. How can I keep in on channel 3. ...

...wont reset it just stays in that state. It will do it to another tv when I changed it but it will keep reseting it and get out of it. I am pretty sure it has to do with my cable box now that it does ...

...wont stay in overdrive top gear, as i reach aprox 40mph box goes into top gear then straight back to down a gear,it does this up and down 3 or 4 times whilst still accelerating untill i reach aprox ...

...wont stay on. if it is hooked up through the componant, or composite cables, that is the red white yellow, or the red blue green red white, you have to take note of what input it is plugged into on ...

...wont change size???? Less than a year old. Can you help me Thanks Wayne If you are using a cable box, the settings you want are in the setting menu under "format" or "display" . Typically the choices ...

...wont turn on orange light stays on and red and green light flashes and nothing else happens Every few minutes my DTI6300 160Mb box goes through the re-boot procedure (i.e. orange flash, three lights, ...

WONT WORK. Do a code search process. If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following

...wont go off. drove to tire discounters to put tires on, and it drove fine never died. When they went to start it and pull it in it kept dying on him, and has been eversince when i stop. Battery light ...

...pop up but wont let me get to them,the channel buttons wont do anything it stays on 2 go to cable input, go up one channel, if that won't work, scan for channels but make sure your cable box is ...