Questions & Answers for: wiring diagram heater blower resister

Question about 2004 Canyon

2 Answers

...Heater blower motor does not work. It only works on the highest setting. The Canyon has an inherint problem with the Fan Power cable being loose. When I say loose...I'm saying that you need to adjust ...

Ad

Question about 2004 Canyon

2 Answers

...heater blower motor on a 2004 canyon truck and where is it. the heater motor should be located on the passenger side either under the dash by passenger's feet or under the hood on the firewall(wall ...

Ad

Question about 2004 Canyon

2 Answers

blower motor ok.. will replace connector $50.00 could still be resistor issue??? Replaced connector and everything is perfect. Several canyons have had this same issue . looked through several forums.

...blower motor, or is there something that I am not thinking of? I believe your problem is a burned out dropping resistor. I don't know if you will find it under the hood near the heater, or behind the ...

Question about 2005 Canyon

3 Answers

...blower motor resister,it is mounted right next to the blower motor,it has a lug with about 7 wires on it.Just unplug it and remove two screws to remove the resister.This controls the speeds for the ...

...Wiring harness - p/n 89019124 $20 * You don't need to remove the glove box, just lay on the floorboard and look up under the dash. There's a 4-wire harness plugged into the resistor assembly (white ...

Question about 2006 Canyon

1 Answer

2007 chevy canyon wiring diagram 2007 chevy canyon radio wiring diagram http://www.modifiedlife.com/2006-gmc-canyon-car-radio-wiring-diagram/

Question about 2004 Canyon

1 Answer

...wiring diagram an check power and grounds . Do you have a volt meter ? You can buy them cheap enough at a parts store . Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html ...

...4 for the A/C and Heater. Is it a fuse or switch problem? It's your blower motor resister. It is located on or near the blower motor. This, when it goes bad, will cause your fan to only work on

heater resistor with key on or off The resistor provides the ground circuit for the blower motor. So you would need to have power at the blower motor first. Grounding the motor or resistor should make

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...